A-Pillar Light Mounts

[MikeJLURubi]

I bought quality over quantity! I think nothing is worse than seeing a vehicle covered in led box lights or cubes..... the XL80's are way brighter than anything else. Also keep in mind that with BaJa Designs, you can change your colors and beam patterns out with a hex wrench..... food for thought! I also think Rigid is crap. I've had these lights for 3 yrs now. I pulled them off my JK from the sale and they look brand new and function perfectly with every flick of the switch.

I bought quality over quantity! I think nothing is worse than seeing a vehicle covered in led box lights or cubes..... the XL80's are way brighter than anything else. Also keep in mind that with BaJa Designs, you can change your colors and beam patterns out with a hex wrench..... food for thought! I also think Rigid is crap. I've had these lights for 3 yrs now. I pulled them off my JK from the sale and they look brand new and function perfectly with every flick of the switch.

Very good point! Thanks so much for your help.

Sponsored

 

[Man-of-methods]

I bought quality over quantity! I think nothing is worse than seeing a vehicle covered in led box lights or cubes..... the XL80's are way brighter than anything else. Also keep in mind that with BaJa Designs, you can change your colors and beam patterns out with a hex wrench..... food for thought! I also think Rigid is crap. I've had these lights for 3 yrs now. I pulled them off my JK from the sale and they look brand new and function perfectly with every flick of the switch.

Which ones did you get? Driving or the wide beam?

 

[Brian_18JLUR]

I got the combo ones for sure, kept mine in white

 

[Rumblefish]

I ordered a set of Baja Designs brackets for my Denali D4 2.0 Lights that I installed last night, I still need to finish wiring them to the AUX switches. The lights were originally designed for motorcycle use, but I had a spare set, so on the Jeep they go. Denali Electronics is starting to produce stuff for Jeeps.

http://www.denalielectronics.com/led-light-kits#d4


I will have to snap some pics of it done and turned on in the dark.

 

[Rumblefish]

Here are a couple of pics of the lights installed on the Baja Designs brackets.

 

[dajuicejml]

Couple more of the Baja Designs mounts w/ Dually XLs

 

[EsTxDr]

QUOTE FROM MY DM: I am sorry I have been out of the office so I did not see this. You can get just the mounts but you will need to call our sales team to do so. The part number is 70047 and they are $20 for the pair. Just call 1-800-222-7023 and any of the guys can assist you.

Thanks for the tip, just called and ordered a pair.

 

[Brian_18JLUR]

I personally don't like the BAJA brackets, I think it forces the light too far up in the air and doesn't keep it close enough to the body. When you have a big light, I feel it looks out of place... IMO

 

[Brian_18JLUR]

So here's what mine look like. The best thing about Jeeps is everyone can do it their way and pick what they like. This is just another option to consider when shopping. Also these brackets are $20.00 shipped for the pair and hold these lights with no issues at all. I simply just reversed the bolt to thread from the bottom and not the top.

 

[EvilFrawg]

So here's what mine look like. The best thing about Jeeps is everyone can do it their way and pick what they like. This is just another option to consider when shopping. Also these brackets are $20.00 shipped for the pair and hold these lights with no issues at all. I simply just reversed the bolt to thread from the bottom and not the top.

Which brackets are these

 

[Brian_18JLUR]

Which brackets are these

Rough Country and then I added these bolts for the bracket. Stainless torx with washer built in... can't go wrong. Just cut the extra length off or figure out the mm. depth needed. I took ZERO chances and bought 4". Looks clean and never a rust problem. Also low profile too

https://www.belmetric.com/6mm-torx-...utton-head-flange-torx-stainless-p-12040.html

 

[Wzabrouski]

Anyone use these yet? Seem similar to the RC.

https://www.quadratec.com/p/america...MIi8aijcC03wIVFNNkCh2nvQweEAQYASABEgJLePD_BwE

 

[LincolnSixAlpha]

Used the Artec A-Pillar mounts with two sets of Rigid Industries D-Series Pro 3" cubes. One set is a spot, the other are floods. Lights are so very bright and look great to boot. One set is wired to Aux3, the other Aux4.

 

[CBurrr23]

I was pleasantly surprised when I picked my Mopar brackets up today and saw these! I guess if you order these from now on you get the updated version which is slimmed down and has lightening holes! Looks waaay better in my opinion.

 

[Hayseed_JLUR]

I was pleasantly surprised when I picked my Mopar brackets up today and saw these! I guess if you order these from now on you get the updated version which is slimmed down and has lightening holes! Looks waaay better in my opinion.

Pics installed?

Sponsored