2023 rubicon not starting now?

[Badbear0416]

Btw I do have that 3 6 ltr etorque and maybe something to do with aux battery being on I forgot about. I tested battery it's at like 11.9/12 volts so I assume it's not the main battery

Hey there so I have most of the hard top wire installed except at tipm/fuse box as it got too dark to see anymore. So I packed everything up till tomorrow and wh3n I put negative cable back on dash lights up interior lights headlights but won't start amd no power to windows to put back up for night time ffs. Can't lock jeep either if possible I'll try to figure out how to put in neutral I think there's that orange pull tab at front of centre console and push in garage but I am absolutely stumped why I have some power but nothing to start jeep or windows and locks ? Can possibly because I didn't finish the tipm wires I didn't use battery had it disconnected or is it possible the c5 if that does anything regarding this issue isn't connected properly to bcm? I'm praying I didn't damage a wire in passenger side main harness fishing a coat hanger through for rest of hard top wiring...my luck that's the problem and man what a problem that would be if I have to somehow get that main harness out to fix on passenger firewall...praying it ain't so...

So appreciate help as again can't lock gwt windows up or start jeep

Ty ty ty ty so much

Sponsored

 

[Jeep Wick]

Hey there so I have most of the hard top wire installed except at tipm/fuse box as it got too dark to see anymore. So I packed everything up till tomorrow and wh3n I put negative cable back on dash lights up interior lights headlights but won't start amd no power to windows to put back up for night time ffs. Can't lock jeep either if possible I'll try to figure out how to put in neutral I think there's that orange pull tab at front of centre console and push in garage but I am absolutely stumped why I have some power but nothing to start jeep or windows and locks ? Can possibly because I didn't finish the tipm wires I didn't use battery had it disconnected or is it possible the c5 if that does anything regarding this issue isn't connected properly to bcm? I'm praying I didn't damage a wire in passenger side main harness fishing a coat hanger through for rest of hard top wiring...my luck that's the problem and man what a problem that would be if I have to somehow get that main harness out to fix on passenger firewall...praying it ain't so...

So appreciate help as again can't lock gwt windows up or start jeep

Ty ty ty ty so much

I saw your other thread but I'm not sure what wires you've been working on adding the harness. I added a hardtop at one time but never bothered with the wiper/defroster. Do you have any pics? There was another thread about the floor mat on the gas pedal causing a no start, but I think you have something else going on.

 

[failsafe306]

I’ve heard of people tearing up wiring while going through that passenger side grommet. I got lucky on mine but it does happen.

 

[Badbear0416]

I saw your other thread but I'm not sure what wires you've been working on adding the harness. I added a hardtop at one time but never bothered with the wiper/defroster. Do you have any pics? There was another thread about the floor mat on the gas pedal causing a no start, but I think you have something else going on.

No mat lol

Not sure now as it's too dark and gotta probably stay up all night so no one gets into jeep now lol

Sponsored