2023 Orders - Check in here

[392OVRLND]

Rick thanks for sharing this. Congratulations on your Jeep. Your build is very similar to mine, Hydro Blue, 392 XR, Sky One touch. Mine was just built, so seeing yours added to the excitement. Best of luck with it.

Look what shows up under "Orders updated in the last 24 hours" on Cryptostickers...

Sponsored

 

[Justmefor23]

Look what shows up under "Orders updated in the last 24 hours" on Cryptostickers...

My build doesn’t show up either.

 

[ek1]

I suspect some (or a lot of) data in Cryptostickers is incorrect. For example, this:

Most likely this person ADDED their order to Cryptostickers on November 12th. Who knows when the Jeep was actually ordered.

 

[392OVRLND]

I suspect some (or a lot of) data in Cryptostickers is incorrect. For example, this:

Most likely this person ADDED their order to Cryptostickers on November 12th. Who knows when the Jeep was actually ordered.

Not necessarily. I had no idea about Cryptostickers for about a month after I orderded mine, and my order date reflects correctly. I added my order to Cryptostickers in late September, and it shows "8/23/22" under "Ordered." Why? Because it picks up the data from Jeep's feed.

Keep in mind that there are people in the industry with friends at Jeep (or that work for Jeep) that place orders for 392s, and they do skip the line. While I do not agree with this happening, it does (and I know of several cases of it, personally due to connections to people in the industry and at Jeep), and there's no sense in us getting worked up over it. If I had the connections to do so, I too would have moved my Jeep to the front of the line.

 

[CreepyCrepe]

Built! Hoping for an early Christmas present.

 

[Justmefor23]

Built! Hoping for an early Christmas present.

Congratulations!

 

[ek1]

Not necessarily. I had no idea about Cryptostickers for about a month after I orderded mine, and my order date reflects correctly. I added my order to Cryptostickers in late September, and it shows "8/23/22" under "Ordered." Why? Because it picks up the data from Jeep's feed.

Keep in mind that there are people in the industry with friends at Jeep (or that work for Jeep) that place orders for 392s, and they do skip the line. While I do not agree with this happening, it does (and I know of several cases of it, personally due to connections to people in the industry and at Jeep), and there's no sense in us getting worked up over it. If I had the connections to do so, I too would have moved my Jeep to the front of the line.

Actually you get to pick your order date when you add your order to Cryptostickers:

I think anyone can put any date in there and Cryptostickers will show it as "Order date"

 

[392OVRLND]

Actually you get to pick your order date when you add your order to Cryptostickers:

I think anyone can put any date in there and Cryptostickers will show it as "Order date"

Huh, must have forgotten about that shitty design feature when I added mine.

Well, that would explain why Cryptostickers has so much trouble staying available. Shoddy application design, especially when that data can be pulled directly from Jeep's feed with nothing more than a VON (VIN not required).

 

[Strategist]

Agree…my build is missing from the screenshot and I have updates in those dates.

Mine isn’t listed either

 

[Swisskidd]

Mine doesn’t seem to be in the “Build on 12/5” group. I’m at 128 days in “C” on the trackers.
It took us 3 hours to build this one…

Might want to inform Cara that the Lego(?) Version has no supply delays.
On the other hand, she may start referring others on the waiting list to Lego after knowing this……

 

[Justmefor23]

Might want to inform Cara that the Lego(?) Version has no supply delays.
On the other hand, she may start referring others on the waiting list to Lego after knowing this……

You should work for marketing.
A lego package! Bright yellow…
They could do a Tonka version too!

 

[RAMSTEEL]

Great looking Jeep. Go 392s. They are a blast to drive!!!! Did you have to trim anything under the hood to fit the hood props/struts? If so, what did you use to cut with?

Nope, just take the driver's side hood bracket and flatten it just a bit. I took a 1x1 and tapped it with a rubber mallet on the bend while laying on the concrete. Basically, you just need a hair more lift to stay on top of the massive air cleaner ducting system. I was either going under it (don't) and/or over and over was way easier.

 

[RAMSTEEL]

Rick thanks for sharing this. Congratulations on your Jeep. Your build is very similar to mine, Hydro Blue, 392 XR, Sky One touch. Mine was just built, so seeing yours added to the excitement. Best of luck with it.

You're welcome. Congrats, shouldn't be too long now for you. You're going to love it. I have loved every jeep I've owned but holy cow this thing is fun. It's louder than I imagined so find that dash exhaust button if you're starting it in the AM or late at night

 

[Victory]

My dealer just texted me that my Jeep is currently in “Trim”, apparently the last step of the build - but still before JB where I believe I’ll be going to get my extra doors packed in the back.

 

[Justmefor23]

My dealer just texted me that my Jeep is currently in “Trim”, apparently the last step of the build - but still before JB where I believe I’ll be going to get my extra doors packed in the back.

Mine is at the same location. The only odd thing I have is the mirror kit. Im not sure how much effort that requires but hopefully the wont be short on wing nuts….?

Sponsored