tailgate

I am looking to buy a tire carrier and tailgate reinforcement kit and I am wondering which one I should take between the Rugged Ridge Spartacus HD Kit (including the hinge casting tailgate reinforcement and the wheel mount) and the Mopar Tailgate Reinforcement Kit + Ovesize Spare Tire Carrier...

Hey everyone. Does anyone know the max weight for the tailgate with the mopar reinforcement installed. Manual says the max weight stock but can’t find anything related to the two reinforcement kit other than “needed for mounting larger tires”. I’m running 37s and it appears fine but would like...

Experiencing a noise in right rear corner of my 2 door Wrangler Sport. Heard at low speeds and usually loudest in reverse. Sounds like a light bumping noise. Jeep spending 2nd night at dealer. Dealer states they can hear the noise, but cannot locate the problem. Dealer states they tested similar...

The benefit is that the lights go on each time I put into reverse as opposed to the aux switches. I'm pretty sure half the time I will forget to turn them off so just curious. I am in the process of mounting two of these: I will be mounting on the tail gate and would be taping into the...

I recently did a DIY on interior and tailgate area lighting; I didn’t take pictures however I did do a DIY video on YouTube. I’ll leave the link below. Any comments or questions are welcome; leave them in the forum or the video! Thanks for watching!

The factory LED dome light does not provide illumination for the rear cargo area. This makes it difficult to see at night when accessing cargo. The new ORACLE Cargo LED Light Module easily adds bright LED light to the rear hatch area using an existing power source! Simply replace the factory...

Hey guys, just thought I would post some pics on a DIY storage box for the tailgate that I built. Have to give credit to a fellow member for his write-up and all the info he posted on his setup. I was originally going to do it the way he did but found the perfect box and decided to go a slight...

Very quick and easy install. Approx Install Time .50 mins. It took me .25 of a beer. The Mopar Tailgate Table can hold up to 25lbs and is made of metal that is coated. Tools required: Drill 1/2” Drill Bit 10mm wrench T-30 Torx Bit Trim removal tool You will be provided in the kit the...

Guys is it necessary to relocate the third brake light with a 35" spare on the Rubicon? I see some of you have done that, but if I don't have to, that would make me happy. Also was it necessary to get the tailgate reinforcement kit to carry the bigger tire? I'm thinking my new wheel/tire combo...

I have a stock Rubicon JLU and the tailgate has started rattling when I drive over bumps. It's driving me crazy. Anyone else have this problem? I had someone sit in the back to try to pinpoint the noise while I was driving and all we could tell is the noise is coming from the latch area...

My rear glass is rattling/squeaking especially on roads that aren't smooth. I climbed in the back and pushed on the glass while my wife drove around and the noise stopped. So I adjusted the latch and catch to tighten up the tailgate some. That helped a little but the noise is still there...

Has anybody messed with the tailgate latch at all? I've been sleeping in the back of the JL and I wanted to be able to open the tailgate from inside. I found this video of somebody doing this in a JK. I was hoping somebody had looked at this and maybe even did it already. I'd love to be able...

Installed the Mopar Tailgate Table today... Relatively easy install. Hardest part was finding a 13mm drill bit. Had to drill 4 holes but they were clearly marked on the backside of the trim panel. https://www.allmoparparts.com/sku/82215416ab.html

Do you have a new JL Wrangler with that louvered plastic piece on the back. It looks like it could be something but sadly its just for looks. BUT! is it? Yes it is. So here is a cheap way to make it something. Start by popping it off. This is done by pulling straight out starting next to the...