springs

OEM JLU Rubicon Take-off Suspension with the max factory OEM height springs (61/62, 91/92). I had done the research and sourced the springs myself when doing a Rubicon Take-off installation a few years ago. My JLU Willys had the lowest springs (57/58, 87/88) and got about 1.5-2" from these; I...

Hey JL fam! After about a year I’m starting to see a lot of rear sag in my JLUR - like me after Thanksgiving dinner haha I’m looking for help & recommendations on the best way to handle it. Especially for longevity and running tons of miles on and off road as I overland full time all year (I...

I have a 24 Wrangler Rubicon 4 dr with extreme recon. The back of the Jeep is sagging 2 - 21/2 inches due to my overlanding setup. Any recommendations for Springs in the back to level out the Jeep? Also would I need to add anything else e.g. Bump stops…. I simply want to return it to stock height.

Update: I caved and bought MC springs, control arms, and rear trackbar Update 2: MC Springs are amazing love their top and bottom custom pads seem to be a perfect spring rate for me as well. Love how my Jeep rides now. Would recommend! TLDR: Should I cancel my back ordered JKS 2.5 HD springs...

Selling springs, shocks, sway bar links, and steering stabilizer from a 2021 JLUR with 3.6 Etorque and hardtop at 15k miles. No LCA’s as they were re-used on the new lift. Located in Northern Kentucky. $150 obo. LOCAL PICKUP ONLY.

Set of FOUR Rubicon coil springs (2 front, 2 rear), red shock absorbers (2 front, 2 rear) and a pair of front sway bar links (JLU Rubicon). These are from a 2020 JLUR (4-door), 3.6L, auto, hard top, steel bumper group, tow package. These have about 25K miles on them. See link below for...

This is a complete set of 'Take-off' Fox Shocks & Springs from a Rubicon 392 $500.00 • Removed from my new Wrangler JL Unlimited Rubicon 392 XR • Like New Condition, Removed from my with less than 250 miles • Amount of Lift Gained Varies from Each Individual Vehicle, but this kit lifted the...

So, I've been working on installing my Rock Krawler 3.5" No-Limits Mid-Arm suspension lift on my Rubicon 4xe. I have everything installed with next steps being to align the front end and adjust the rear pinon angle, finishing up with torquing down all of the control arm jam nuts. The reason...

Cleaning out garage... need to sell some misc parts i don't need. JLUR Diesel Springs. Gives a gas Rubi ~1.25" lift or Sport about 2.5". $150 ICON JLU 2.5" springs. Got these from a guy who put them on but immediately took them off because he needed 3.5" springs. Practically brand new. Comes...

2019 JL Moab - Brand New Shocks, Springs - Removed at dealer before taking delivery. Available in Northern Virginia, DC Area. $150, OBO.

Qty 4 - 2021 JLUR shocks Qty 4 - 2021 JLUR springs ~12k miles. Still in great working condition. Being replaced with new suspension system. PM me if you would like additional details or photos. Located in Durham, NC Local pickup only $100 / OBO $25 / OBO if picked up by 7/29 at noon

I have a whole set of control arms, shocks, springs and a few other miscellaneous parts that I have from my 2019 Sahara, left over in storage from when I lifted it. I also have the stock front track bar and another long bar I don’t really know what it is haha maybe the rear track bar? How much...

These were taken off at 1900 miles. Parts are off Willys and Rubicon model. Pics show part numbers. Also no pictures is factory stabilizer. No damage. Swapped out and no longer need. https://www.facebook.com/marketplace/item/1623723841360990/

I recently replaced my springs and my front lower control arms. These came off a '21 JLU Willys with about 4600 miles. Most of it is pretty close to new, but one of the control arms has a little scraping from the trails. Note no shocks available. Willing to part with them for free. I imagine...

I'm interested in putting Rubicon take-off springs on my Willys. As I've started to learn about the process, I've found several threads discussing the best types of springs, comparing which ones exist, etc (like the sticky one at the top). However, I'm failing to find a thread that explains what...

MetalCloak 3.5” coil springs for a JLU with V6 spacers and front correction pads. Can be used on other trims/engines with different spacer combo. Springs have 266 miles. 1 front short spacer 1 front tall spacer 1 rear spacer Front correct pads are new in box. Will consider selling separate...

Zzz

Only 70 miles on these 2021 factory Diesel Rubicon parts. Super clean, like new! Crate included. $180 Cash only, pickup only. Scottsdale Airport. No trades.

At this point it seems questionable as to whether or not this badge belongs on my Jeep: I have a 2021 JLUR Ecodiesel. I wanted a functional lift for better breakover angle and to fit 35s. I have had many many problems with my previous JL and wanted to add a lift without any warranty...

posted in wrong place