Sponsored
Cloak Jito - 2018 JLU Sport 2.0L on D60's and 40's
- Thread starter CloakedWillys
- Start date
- Watchers 20
OP
OP
- First Name
- Will
- Joined
- Jul 16, 2018
- Threads
- 7
- Messages
- 499
- Reaction score
- 970
- Location
- Rancho Cordova, CA
- Website
- www.metalcloak.com
- Vehicle(s)
- 18 JL 2.0T Sport S
- Build Thread
- Link
- Occupation
- Sales and tech support for MetalCloak
- Thread starter
- #77
Ok. After 4 years of beating on this long arm kit I decided to do some maintenance and dial a few things in to get ready for the next change.
Moved the rear lower shock mounts up to right where the coils still have preload to allow full droop. Up travel worked out well.
Note.... I am not a welder
. I was able to clean it up and it will hold but it wasn't pretty.
Moved the rear lower shock mounts up to right where the coils still have preload to allow full droop. Up travel worked out well.
Note.... I am not a welder
. I was able to clean it up and it will hold but it wasn't pretty. 
OP
OP
- First Name
- Will
- Joined
- Jul 16, 2018
- Threads
- 7
- Messages
- 499
- Reaction score
- 970
- Location
- Rancho Cordova, CA
- Website
- www.metalcloak.com
- Vehicle(s)
- 18 JL 2.0T Sport S
- Build Thread
- Link
- Occupation
- Sales and tech support for MetalCloak
- Thread starter
- #78
OK, decided to to install a star link mini on the jeep. Since I don't have a back seat this spot made a lot of sense and hides it well with the top off.
There is a hole in the cage above it I dropped the t bolt through. It took a bit of effort to get to drop in the bottom hole. A small hose the threads fits into from the bottom would have made it easier.
Here is the part list. I fished the T bolt into the hole in the cage
https://www.amazon.com/dp/B0FJCB4LM...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0FPM9V6Y...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0FCLBMMK...7C&ref_=aip_sf_list_spv_ofs_mixed_d_asin&th=1
https://www.amazon.com/dp/B0FL6QJ8H...7C&ref_=aip_sf_list_spv_ons_mixed_d_asin&th=1
https://www.amazon.com/dp/B0FPCY769...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0C3B51KD...IBLC07C&ref_=aip_sf_list_spv_ons_mixed_d_asin
There is a hole in the cage above it I dropped the t bolt through. It took a bit of effort to get to drop in the bottom hole. A small hose the threads fits into from the bottom would have made it easier.
Here is the part list. I fished the T bolt into the hole in the cage
https://www.amazon.com/dp/B0FJCB4LM...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0FPM9V6Y...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0FCLBMMK...7C&ref_=aip_sf_list_spv_ofs_mixed_d_asin&th=1
https://www.amazon.com/dp/B0FL6QJ8H...7C&ref_=aip_sf_list_spv_ons_mixed_d_asin&th=1
https://www.amazon.com/dp/B0FPCY769...IBLC07C&ref_=aip_sf_list_spv_ofs_mixed_d_asin
https://www.amazon.com/dp/B0C3B51KD...IBLC07C&ref_=aip_sf_list_spv_ons_mixed_d_asin
Sponsored
