Mopar Tailgate Table Spacer/ Standoff Lengths?

[fdFifty]

Does anyone happen to know the lengths of the aluminum spacers that come with the Mopar tailgate table? I'm in the process of designing up a tailgate organizer and would like to use the factory mounting locations. Once everything is dialed I'll be posting an install writeup with cad files.

Sponsored

 

[Bleep]

Does anyone happen to know the lengths of the aluminum spacers that come with the Mopar tailgate table? I'm in the process of designing up a tailgate organizer and would like to use the factory mounting locations. Once everything is dialed I'll be posting an install writeup with cad files.

E is 1.188"

 

[fdFifty]

E is 1.188"

Awesome. Thanks Bleep! I've read that one of the four standoffs is longer than the others. I'm assuming that would be part D? In the image the difference looks almost negligible. Does that appear to be the case in person?

 

[Bleep]

Awesome. Thanks Bleep! I've read that one of the four standoffs is longer than the others. I'm assuming that would be part D? In the image the difference looks almost negligible. Does that appear to be the case in person?

Funny thing. This photo is what I sent to the seller because I didn't get D, but I got an extra E. They are supposed to send a replacement D. I can get you a measurement when it arrives.

 

[fdFifty]

Funny thing. This photo is what I sent to the seller because I didn't get D, but I got an extra E. They are supposed to send a replacement D. I can get you a measurement when it arrives.

Ah gotcha. Thanks so much again for grabbing these dims. Hopefully I can find comparable McMaster-carr part numbers for anyone else who ends up with missing hardware.

 

[jason0341]

Funny thing. This photo is what I sent to the seller because I didn't get D, but I got an extra E. They are supposed to send a replacement D. I can get you a measurement when it arrives.

Any chance of knowing the size? I didn’t get D in my kit as well.

 

[Springtail]

Any chance of knowing the size? I didn’t get D in my kit as well.

This is the stock spacer dimensions

5/8 (outer Diameter), 0.25 (inner Diameter), 1 inch (length)

½ (outer Diameter), 0.25 (inner Diameter), 1.2 inch (length)

1/2 (outer Diameter), 0.25 (inner Diameter), 1.3 inch (length)

Doc

 

[jason0341]

This is the stock spacer dimensions

5/8 (outer Diameter), 0.25 (inner Diameter), 1 inch (length)

½ (outer Diameter), 0.25 (inner Diameter), 1.2 inch (length)

1/2 (outer Diameter), 0.25 (inner Diameter), 1.3 inch (length)

Doc

Thanks!

 

[jason0341]

Anyone know where I can find an extra one? Need the longer length.

 

[Springtail]

Anyone know where I can find an extra one? Need the longer length.

Don't take this wrong because I am not "that guy" to tell people to use search button.

In this case, Google is your friend.

Doc

 

[jason0341]

Don't take this wrong because I am not "that guy" to tell people to use search button.

In this case, Google is your friend.

Doc

It’s ok. I have and I’ve found a company but it’s like $45 to have one made.

 

[D60]

It’s ok. I have and I’ve found a company but it’s like $45 to have one made.

A single standoff? In aluminum?

Dude lmk what you need and I'll whip one up on the lathe

Funny this came up 'cause it seems I've been into my tg more than I'd like. I got sick of not remembering where the single oddball went the other night and took my engraver to the OD labeling location - I think it was "LOWER LEFT" ? for the odd duck?

See, I can't even remember and it was just a few days ago. Thus why I got medieval with the pneumatic engraver LOL

 

[jason0341]

A single standoff? In aluminum?

Dude lmk what you need and I'll whip one up on the lathe

Funny this came up 'cause it seems I've been into my tg more than I'd like. I got sick of not remembering where the single oddball went the other night and took my engraver to the OD labeling location - I think it was "LOWER LEFT" ? for the odd duck?

See, I can't even remember and it was just a few days ago. Thus why I got medieval with the pneumatic engraver LOL

yep that’s the one! It’s like 1.3” long outer is 1/2” and inner is a .25”.

 

[D60]

Just to supplement Springtail's info, the Mopar spacers are:
Short 1-3/16" x 1/2" OD by 9/32" ID. In machinist speak that's 1.1875" x .500" with a .281" ID

Long is the same as above except length is 1-5/16" or 1.3125"

Not doubting Springtail but ya gotta watch those guys who say they like the FJ Cruiser

More seriously, I'm surprised it appears they were shooting for inch sizes here when the world is mostly metric

Some of the numbers convert readily like 1-3/16" is basically 30mm but the rest, not so much

1.300" is basically 33mm but mine was very clearly 1.312" which tells me they were after 1-5/16"

 

[D60]

I had some 1/2" Al raw stock laying around so that made that easy.

Lopped to length in the bandsaw, faced to length in the lathe and thru-drilled.

I made a second long one if anyone needs it for shipping cost

@jason0341 yours is in the mail

Incidentally, if anyone ever finds themself in need of something like this, stroll into your local vo-tech machining program and ask the instructor if they'd have a first semester kid make it. Most vo-techs want desperately to stay on good terms with the community and are happy to do this. Unfortunately, machining isn't as sexy as welding or automotive and the machine shop programs are slowly dying due to minimal enrollment

Sponsored