What did you do TO your Jeep JL today?

[parrotheadphan]

I installed the door sill guards.

Sponsored

 

[Jo's Jeep]

I really love the placement of all your decals!

Thanks. They were printed by Street Designs Inc. of Newport Beach CA and applied by Wet Okole staff (I believe) for SEMA. I pulled off the ones from the sponsors that pulled their products off the Jeep after the show and left the ones that let me keep their stuff.

 

[plex]

Got my Mopar Slotted Off-Road wheels back from the powdercoaters and they came out perfect.

You need some black lug nuts!

 

[BigJimSlade]

You need some black lug nuts!

Nothing wrong with chrome lug nuts on black wheels.

 

[VGxHC]

Installed the Rough Country spare tire riser.

 

[emilboya]

Gave her a bath and enjoyed the view during lunch

 

[SteadyC]

Link -
http://m.uprproducts.com/jeep-billet-oil-catch-can-separator-wrangler-36.html

It was about a 20 minute install with my little helper assisting.

Did the thread tape come installed from UPR or did you put it on? Mine came with pink thread sealer. And mine came with the inside filter backwards, the lower part with the steel wool was on the clean (driver) side.

 

[IndustrialAction]

Removed steel bumper end caps and installed the @Maximus-3 stinger. Unfortunately, didn't get a chance to wash the salt off

 

[blnewt]

New Split Halo LEDs w/ SUP-Light adapters

 

[JC7]

Did the thread tape come installed from UPR or did you put it on? Mine came with pink thread sealer. And mine came with the inside filter backwards, the lower part with the steel wool was on the clean (driver) side.

@joe@upr

 

[Bilymac]

Rinsed off salt from recent snow.

Foam Cannon FTW.

 

[buckinoff]

New plate! Can't believe it wasn't taken yet

 

[TTEChris]

Installed a winch & Rigid radiance LED's in my wife @TankGirl @ROAM Pioneer front bumper. I ordered the radiance lights with amber lighting so I could run a secondary blinker with the backlights

Also installed a Trigger 6 Shooter on my JL and messed around with the strobe feature

 

[CalsJLUR]

Did the thread tape come installed from UPR or did you put it on? Mine came with pink thread sealer. And mine came with the inside filter backwards, the lower part with the steel wool was on the clean (driver) side.

It came assembled with the white thread tape, and the steel filter was on the passengers side, but it was outside the housing.

 

[Sharkbite22]

I swapped out my Rancho springs for Mopar springs and installed Metalcloak rear upper control arms. Took it out to make sure everything was working right

Sponsored