What did you do TO your Jeep JL today?

[robaw]

Are this the ones from Amazon?
I was hesitating to buy some like this or the Mopars. How is the quality?

Yes - it's the Seven Sparta ones from here - https://www.amazon.com/gp/product/B07DK73QCW/

From what I can tell, they're pretty much identical to the Mopar ones except the obvious logo difference. Seems like good quality plastic, 3M tape is sticking well. Don't know how well they'll actually protect the sill, but just as well as the Mopar ones would I guess.

Sponsored

 

[pangmaster]

Looks good. Question for you: I see the holes for the backup sensors, do you have them? Do they have ghosts?

I do not have the sensors. The holes are covered with plastic caps.

 

[TBULL52]

Small red functional accents (cell phone holders for back seat, sport bar flash light, and 1st aid kit) and 67 Designs dash mount.

Where did you get the cell phone holders for the backseat. I think my kids would enjoy that

 

[TrailTorque]

Took delivery of the new SRC Side Armor steps!!

After a quick work event this evening, these bad boys are going on!!

Were you able to get them installed?

Also, I assume you're not getting them Rhino Coated before install?

 

[Hydroboy35th]

Looks completely like a Rubicon. Where did you bought the high fenders?

The axles on a non rubicon are narrower making the wheels & tires tucked under the fenders more (no stance). I never understood why people spend money to make their cars (Jeeps) look like stock versions of that car/Jeep. To me if you’re going to start buying stuff “personalize” it don’t make it look stock. But to each his/her own and if they’re happy that’s all that matters.

 

[km58501]

The axles on a non rubicon are narrower making the wheels & tires tucked under the fenders more (no stance). I never understood why people spend money to make their cars (Jeeps) look like stock versions of that car/Jeep. To me if you’re going to start buying stuff “personalize” it don’t make it look stock. But to each his/her own and if they’re happy that’s all that matters.

Its probably more cost effective because you can purchase cheaper take-off parts from people that are personalizing their Jeep.

 

[RMojitoJL]

Yesterday actually, but...

Where did you get the sticker made to match the factory style?

 

[RavenJeep]

Added an onboard air system to air up and air down all 4 tires at once.

https://www.innovativejkproducts.co...ith-arb-twin-compressor-ckmta12-package-deal/

I love it so far. Mounts under the passenger seat. It's hard tell it's even there which will be great for the summer with the doors off. Easy to use, storage bag for the airhoses hangs from my back headrest so it's out of the way but easily accessible. All in all I think this will be one of my favorite upgrades.

I spent 90+ days driving on the beach last year so being able to do all four tires at once will be awesome. In addition, I'm frequently coming off the beach in the dark and I had a couple sketchy things happen last year so being able to air back up in a well lit public place or at my campsite , instead of at a dark deserted airhose will make me feel much safer.

 

[RMojitoJL]

Mojito Rubicon just went KZ Status - hopefully will arrive this month at the dealer for me! ​

 

[RavenJeep]

Added my Molle bags. Everything is organized, looks great! Very happy and thanks to this forum for providing the links to them.

 

[PowerGuy]

Finished watching them install my lift and new tires/wheels. I gave them a few pointers, I’m sure they would’ve been lost without assistance. (Sarcasm)

305/70/17 Nitto Ridge Grapplers
Stealth Custom Series K-5 17x8.5 rims (-10 offset)
RC 2.5” spacer lift for now

 

[Fire Burns]

Added my Molle bags. Everything is organized, looks great! Very happy and thanks to this forum for providing the links to them.

How did you attach those molle bags? I've found the stock tailgate "molle" slots are way too skinny and obstructed to be of any use. It is a ridiculously poor design. Anyone else have that issue?

 

[RavenJeep]

How did you attach those molle bags? I've found the stock tailgate "molle" slots are way too skinny and obstructed to be of any use. It is a ridiculously poor design. Anyone else have that issue?

I totally agree that it's a poor design. There are people who have gotten the straps through with effort but the problem I see with that is, it would be really hard to take them back off. I just used zip ties to make several small "rings", then threaded them through those. Works great, you can't see them and preserves my ability to easily attach and detach the bags.

If I'm out on the trails and we need the first aid kit, I want to be able to grab it and go.

There may better solutions but this works and was cheap and easy.

 

[vhfan5150]

Added a Warn front bumper tube. About $50 cheaper than the JCR. My plan was to just get a winch-ready bumper with a bull bar but could never find one I liked that had the modular capability of the OEM that I already had... for a decent price. So looks like I’ll be piecing this one together. Next up will be a winch plate, then the debate on which winch to get.

View attachment 126889

 

[plex]

So my state does not require a front tag, but my jeep came with a pre-drilled license plate holder (dealer trade from TX). I figured out this acrylic Jeep matte black tag fitted there perfectly and added some accents, especially since JL does not have "Jeep" above the grille.

Also put on a GearAmerica aluminum shackle receiver, really heavy duty and aggressive look!

Next job: install the Rigid back up lights!

Sponsored