What did you do TO your Jeep JL today?

[Magnetdragon]

Love the mirrors, I think I'm getting ready to order a set myself. Were they an easy install?

Super easy.. I just recorded this so people could get a better look at them before buying them.

Sponsored

 

[RDT300]

Mind if you share where you obtained?

the metal signs were from

https://www.allthingsjeep.com/signs.html

the wood piece was the lid from my molar lift crate with some decals and emblems..

 

[jlroman2]

Decided to test juuuusssst how far I could go on a tank full. Luckily the gas station is at the bottom of a hill, in case I would have run out.

so how much did it still have left?

 

[jlroman2]

Waiting for my 5th rim to get off of back order. Then will add on my Nitto Ridge Grapplers. Only 33s for the Sahara with no lift. Added a mopar grille that I painted matte black. And a black hood decal and stubby antenna. Not a lot, but makes it look even better. Also painted the ugly silver inserts on the bumper.

did you paint the grill or is that the black Mopar one?

 

[Rhinebeck01]

so how much did it still have left?

I believe at E on the display you would have approx. 2 gallons of gas left.

 

[From0toJ]

the metal signs were from

https://www.allthingsjeep.com/signs.html

the wood piece was the lid from my molar lift crate with some decals and emblems..

Many thanks

 

[Cwelroy]

did you paint the grill or is that the black Mopar one?

It’s the black mopar grille available at Quadratec. I did paint it matte black, though. It comes with a black primer coat on it that has a little shine that I wasn’t too fond of, so that’s why I painted it. Used an automotive matte black spray paint from AutoZone.

 

[FrenchSSGTMike]

I believe at E on the display you would have approx. 2 gallons of gas left.

2 gallons... so approximately 150 more yards ?! Lol

 

[szobell]

Got the Mopar lift installed and some used 35s on my local jeep page. I also put on the CMM mirrors!

Looks great!!

Have you been on the freeway with those mirrors? How much vibration do you get? I have some in my hinge, but I’d like less (ideally none) as far as vibration.

 

[TBULL52]

the metal signs were from

https://www.allthingsjeep.com/signs.html

the wood piece was the lid from my molar lift crate with some decals and emblems..

Awesome. Thank you

 

[COBoarder]

Wow - now that is some serious hardware to build your hard top hoist system

Thanks for the laugh. Love the jokes only jeepers understand. What a great community

 

[Hydroboy35th]

That looks great, I've been looking for a Rubi compatible hood decal and Haven found one.

I feel like the corners should be rounded at the front to match the profile of the hood.

 

[Bigjake]

Looks great!!

Have you been on the freeway with those mirrors? How much vibration do you get? I have some in my hinge, but I’d like less (ideally none) as far as vibration.

I have the same set of mirror and had no vibration issues. Had them on the interstate at a little over 80 MPH. The only “issue” I had was there was a small whistle from the passenger side when going that fast but you could only hear it if really paying attention to it. In reality there are a ton of loud nosies that drown out the whistle when doing 80 with no doors/top.

 

[TheRealTVGuy]

so how much did it still have left?

After a quick calculation I estimate 3.213 gallons. So, maybe not as little as I thought!

 

[keyrose]

Antena X and punched the plug holes and fit the Mopar Mats in the holes.

Same.

Sponsored