Under seat air coupler mounts

[Jeepnutz]

Have a ARB dual compressor and under seat mount on order. I would like to have a air coupler on both sides so I'm looking for a coupler mounting solution that mounts beside the driver and passenger seat. Haven't had any luck with Google.

Sponsored

 

[BullMoose1776]

I too am suffering from this condition. I am glad I found your post. Perhaps my comment will push this to the top for an enlightened Jeeper to see, and share with us.

 

[Chocolate Thunder]

You mean something like this?
https://innovativeatproducts.com/sh...or-jeep-jlu-for-use-with-arb-twin-compressor/

 

[MacombRoger]

You mean something like this?
https://innovativeatproducts.com/sh...or-jeep-jlu-for-use-with-arb-twin-compressor/

I have this kit, it has worked out great. I even added some shut-offs under the seats so its easier to turn off one side if using the compressor to fill up other peoples tires.

 

[BullMoose1776]

You mean something like this?
https://innovativeatproducts.com/sh...or-jeep-jlu-for-use-with-arb-twin-compressor/

Well...yes and no. I'll have the compressor mounted on the passenger side with the ARB underseat mount. I'd like to have an additional hose run to the driver side, with an Air Hose Coupling on the driver side. I can source all the components for this, but have not yet found a mount for the air hose coupling.

I am not a metal worker so "fab one up yourself" is not an option for me.

 

[MtCamper]

I emailed them yesterday and got an immediate response. Looks like a company I'd do business with. My ARB is mounted behind the driver side passenger seat and they are putting together a kit for my application.

 

[Jeepnutz]

You mean something like this?
https://innovativeatproducts.com/sh...or-jeep-jlu-for-use-with-arb-twin-compressor/

Well...yes and no. I'll have the compressor mounted on the passenger side with the ARB underseat mount. I'd like to have an additional hose run to the driver side, with an Air Hose Coupling on the driver side. I can source all the components for this, but have not yet found a mount for the air hose coupling.

I am not a metal worker so "fab one up yourself" is not an option for me.

I definitely like the ARB mount better than Innovative. Like you, all I'm looking for is a drivers side air coupler bracket.

 

[813 Fabrication & Design]

This is a new plate that I put together that holds a rocker switch and ARB air coupler. It will work on Driver or Passenger side. It is a 4.7mm thick aluminum plate for rigidity.

https://www.813fabrication.com/prod...il-air-switch-coupler-plate-jeep-jl-gladiator

 

[Terrymo]

Well...yes and no. I'll have the compressor mounted on the passenger side with the ARB underseat mount. I'd like to have an additional hose run to the driver side, with an Air Hose Coupling on the driver side. I can source all the components for this, but have not yet found a mount for the air hose coupling.

I am not a metal worker so "fab one up yourself" is not an option for me.

I have the ARB underseat mount on the passenger side. I used some thin flat aluminum stock from Home Depot. I unbolted the drivers seat and after drilling a hole in the aluminum, bolted the aluminum down using the front seat bolt. I used a rubber mallet to form the aluminum to the curve of the floor pan. Bolted an aluminum cb antenna mount to the flat stock.

More function than form compared to other options mentioned in this thread

 

[CpT Papa]

I did the ARB mount under the passenger seat with the manifold. From the manifold I ran a line through the console to the driver seat. I also ran wires so I can turn the compressor on/off from either side. I made the brackets and added the extra switches I needed.

Sponsored