Offset for Agressive

[terruta]

Hello.

Just purchased a 2021 Jeep Wrangler High Altitude and I'm looking to add 20" by maybe 9" or 10" wheels along with 35" Nitto Ridge.. I'm looking to add very little distance from the flare.. like 1" outside.. So I'm looking to have the wheels done with a "0" offset.. Will this work for the look I'm looking for?
Oh and I'll lift with spacers like 1" or 1.5".

Much appreciated for any advice..

Sponsored

 

[blnewt]

Hello.

Just purchased a 2021 Jeep Wrangler High Altitude and I'm looking to add 20" by maybe 9" or 10" wheels along with 35" Nitto Ridge.. I'm looking to add very little distance from the flare.. like 1" outside.. So I'm looking to have the wheels done with a "0" offset.. Will this work for the look I'm looking for?
Oh and I'll lift with spacers like 1" or 1.5".

Much appreciated for any advice..

I run 295/70/17s (which are about 33.3" tall) and only about 11.5" wide on a 8.5 +10 offset and here's how much my tires poke outside the fender

If you run a 9" wheel w/a zero offset and a 12.5" width 35 tire you'll be about 3/4" out from my set. Here's a site w/ my set and the set you're wanting, you can use this site for any wheel tire combos to visualize what you want
https://www.wheel-size.com/calc/?wh...2.5-18X9ET0&fcl=2in&wcl=1.25in&scl=2in&sr=0in
I would consider a Rubicon suspension swap to get the lift you're wanting, better than a spacer lift and uses all factory parts. Here's a thread on what that entails~
https://www.jlwranglerforums.com/forum/threads/rubicon-suspension-on-2-door-sport.40700/