BrntWS6
Well-Known Member
- Joined
- Dec 19, 2018
- Threads
- 12
- Messages
- 1,282
- Reaction score
- 1,548
- Location
- Land of the FOID
- Vehicle(s)
- 2019 JLUS, 2002 WS6
- Thread starter
- #1
Thought I would post how I fixed my cargo rattle in case someone else has the same problem.
It was mainly over bumps and coming from the driver side. I removed the rear drivers side cargo panel and found this black module to be the problem.
They used plastic inserts to secure it and they loosen up over time. I tapped for two 8mm bolts into the frame and put a little lock tite on it.
Edit: Had another loud squeak start about a week after I fixed this one, I was like wtf. It was also coming from the rear drivers side. I found the protective tape had come off the tailgate bracket here....
I had some spare PPF so I cut off a small piece to replace what was there. All quiet now!
It was mainly over bumps and coming from the driver side. I removed the rear drivers side cargo panel and found this black module to be the problem.
They used plastic inserts to secure it and they loosen up over time. I tapped for two 8mm bolts into the frame and put a little lock tite on it.
Edit: Had another loud squeak start about a week after I fixed this one, I was like wtf. It was also coming from the rear drivers side. I found the protective tape had come off the tailgate bracket here....
I had some spare PPF so I cut off a small piece to replace what was there. All quiet now!
Sponsored
Last edited: