Traction Control

[Medsker]

So I ran Poison Spider in Moab yesterday. At the end of the trail I put it in 2 high and started back home and the "Traction Control" light came on. I pushed the button and the light went off but within five minutes the light came back on. I pushed it several times on the drive home and it did the same thing everytime. I was hoping leaving it overnight would work but it didn't. My TAZER says I'm not pulling any DTC codes. I've seated all the fuses so that's not the problem.

Any Guesses to try?

I really don't want to take it to the dealer. It's a pain to unmarry the TAZER and then put it all back in.

Thanks

Sponsored

 

[GreySportySpice]

Were you using the Tazers off road mode that disables all the electronic assists? Have you tried using it and then restarting the jeep so that they all come back?

 

[Medsker]

I wasn't using the off-road setting. I just use the TAZER for tire size and tpms adjustment. I'll have to look into trying your suggestion.

Thanks!

 

[Medsker]

Well it worked. I was looking through the instructions for the TAZER and it said that whatever you set it for is what it starts up with next. So I turned "traction control" on and then turned off the Jeep quickly before it turned off and it seems to have worked. I drove around for 15 minutes and the light never came back on.

Thanks again for the suggestion!

Sponsored