Show Off your Underhood Wiring Organization

[GATORB8]

Like many, I've tried and failed to keep my underhood wiring nice and neat as I've added items. I've got another stack of things to install, and I want to spend some time redoing everything under the hood.

I'd appreciate if those of you who have put time into getting it right would share some pictures, ideas, and product recommendations for how you got it done. I know @Terrymo has shared before, but his setup is in the range of what I'm thinking.

To give you an idea of what I'm dealing with:
Mopar Aux kit (Crosses firewall)
Warn Power Interrupt and the related winch wiring
Midland 275 (Crosses firewall power and antenna)
Quadratec 4 pin trailer (crosses firewall)
KC Pro6 bar, Pro6 combos, ditch lights, and 6 cyclones

Adding:
Weboost Drive X
Trailer Power
Hardwire compressor
Tazer front cam

Currently thinking, fab up a battery side electrical accessory mount similiar to @Terrymo 's 813. Setup an interior sub panel with battery feed (and ignition relay?) to carry all the interior and towing accessories and get them out from under the hood.

Blue Sea has always been my go to, any other recommended manufacturers that have nice wiring options or connectors?

Sponsored

 

[Grayhound]

Had to add the bus bar to keep things neat and simple.

 

[Terrymo]

You can’t go wrong with anything made by BlueSea. Having the OE Aux switches is a big help as well.

 

[Terrymo]

And the Noco charger set up. Time will tell if it holds up to the under hood heat

 

[SadRobot]

Here is my setup. It’s not as clean as I want it to be but it’s the best I can do with the electrical knowledge I have:

My Jeep doesn’t have AUX buttons so I wired my accessories to an Auxbeam switch box. The box controls:

ARB duel air compressor
Front/Rear air lockers
Front bumper amber light cubes
Midland radio

 

[JLeco2022]

 

[Terrymo]

Looks clean, take a sec and tell us what all you have going on there.

 

[Bayrat]

I'll second the Blue Seas components. Over the years, and many boats, those products have never failed me.

 

[GtX]

Will probably redo all of this over the winter. Because wiring is therapeutic.

 

[GATORB8]

I like the braided sheathing you guys are using. Just Amazon special or is there a better brand to order?

 

[Terrymo]

I like the braided sheathing you guys are using. Just Amazon special or is there a better brand to order?

I’ve used Alex Tech off Amazon on some past projects. Never used any other brands so I don’t have anything to compare to. I was happy with the quality.
https://www.amazon.com/gp/product/B071ZV6MZ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

 

[GATORB8]

I’ve used Alex Tech off Amazon on some past projects. Never used any other brands so I don’t have anything to compare to. I was happy with the quality.
https://www.amazon.com/gp/product/B071ZV6MZ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Thanks!

I found a couple sites with different OEM styl wiring connectors/devices , and have been looking around for ideas. One that seems pretty neat is Waytek.

 

[Terrymo]

Thanks!

I found a couple sites with different OEM styl wiring connectors/devices , and have been looking around for ideas. One that seems pretty neat is Waytek.

Waytek and Del City are good

 

[JLeco2022]

Looks clean, take a sec and tell us what all you have going on there.

let me go take pictures inside, its a 100% custom setup for aux relays inside above my head. will return with pictures and info

 

[JLeco2022]

I like the braided sheathing you guys are using. Just Amazon special or is there a better brand to order?

depends on where the wiring is located, in the engine bay i use heat rated wrap/tube

Sponsored