I have also used and had great luck with nilight products, good choice.That one's a little more exposed than I would want to do.
If it failed once, I'm definitely not going to buy it again. That's setting myself up for failure, and that's a bad idea!
https://a.co/d/4HnGbjc
I've had good luck with nilight light products, so I'll probably just purchase this guy or something similar to this guy.
Are you planning a camera array with this as well?
$40 from AliExpress.
Now I just got to buy a longer cord for the power, so I can tuck it away behind the dash.
Sweet car........I'm back...
TREDSDERT
You can't erase what has been written...Tredsdert said:
First post,
I will be outlining the general mods I've already done and will slowly add more in-depth descriptions of those mods as time proceeds. I will be posting more in depth thoughts on future mods I will be doing, and the processes of getting them done as I complete them.
My Wrangler is a 2021 Willys Sport EcoDiesel. I have manual windows, manual locks, and at the moment no soft top (It's tied up in my garage).
My end goal for my Wrangler is to have a rhino lined black interior, five-point harnesses on four bucket seats, a 4-in lift with at least for the moment maximum 35-in tires. I already have Icon Rebound Pro DOT approved beadlock rims. In the years to come I will redo my exterior paint in a Kevlar coating, I'm still a little undecided on the color I'll choose but will probably stick with a color similar to the Sarge green I already. have. Bushwacker fender flares.
The look I hope to have for my Wrangler will be more along the mainstream look of modded Wranglers. But the process I will take to get there is going to be a winding road of weird stuff coupled with functional mods.
At current this is how my Wrangler sits.
View attachment 695101
Icon Rebound pros sitting on OEM destination MT 32-in tires. Soft top removed. 5 gallon fuel tank holder on driver side fender. Vehicle name "TREDSDERT" vinyl on hood. Aluminum curtain rod painted and placed in spot of front fender flares.
View attachment 695102
"Si Se Puede" mirrored vinyl placed on front window, so that drivers in front can legibly read it in their rearview mirror. Steel rounds screwed into the aluminum hood to allow placement of interchangeable magnetic accessories. Orange "remember to close your hood strap" because I keep forgetting to latch my hood and have dented it in twice. Rough Country tubular front bumper installed. LED headlight upgrade. Trimming and very rough rigging of front fender liners.
View attachment 695103
Custom hood emblem, derived from old steel license plate frame, which I painted gold. Removal of the hood latch to fit a compressor, number one reason why my hood keeps flying up.
View attachment 695104
Front Passenger side door is going to become my sticker panel.
View attachment 695105
Tailgate removed. Third brake light relocated to top rear cross pillar on the roll cage. OEM front bumper trimmed and painted (red) and attached in place of the rear bumper. Holiday truck nuts. Halloween skeleton will act as a Jeep toy that I can dress up for holidays. Lots of projects to be had back here.
View attachment 695108
Rear seats and carpets removed. A bunch of bolts were painted gold at some point, though they don't pop as much as I was hoping. Light bar that came with the front bumper was placed back here for lack of a better location, at the moment it doesn't really serve any purpose other than to blind tailgaters (which I don't do because that's illegal
As with all Jeeps, they leak a little, mine leaks a lot, waterproof container screwed to the floor to hold waterproof gear and a small amount of emergency items.
View attachment 695109
Custom made Polycarbonate semi-watertight roof panel, with 5% ceramic tint underneath. This project took me about 5 months of R&D, and about 15 holes drilled in the roll cage. Honestly my favorite mod I've installed, total cost was just under $250. It gives me that freedom feel I want and still a decent level of protection from the elements.
View attachment 695111
Here's a photo of what it looks like from the inside looking out.
Looking forward to this thread, hope y'all will enjoy it as much as I enjoy putting together these crazy projects.
