New to forum

[GATORB8]

Looks like 3" of bump up front, so you should clear 37s without modification. May scuff the inners a little at full stuff.

Sponsored

 

[mrtm1970]

Some quick pics

THIS is confusing me as it “looks” like a shock extension/relocation bracket.

 

[BDinTX]

Also based on color of components…”looks” like a Metal Cloak lift.

I think you're right. Didn't realize they made a kit with only the UCAs but they do.
Metalcloak's JL Wrangler 2.5" True Dual Rate Lift Kit

 

[GATORB8]

You also have the Stabilizer/Relocation kit installed:
https://metalcloak.com/jl-wrangler-rocksport-steering-stabilizer-kit.html

Double check and make sure you have an aftermarket front drive shaft.

 

[GATORB8]

THIS is confusing me as it “looks” like a shock extension/relocation bracket.

Metalcloak's outboard front shock mounts.

 

[BDinTX]

Double check and make sure you have an aftermarket front drive shaft.

What would he be looking for? I don't know my self : )

 

[GATORB8]

What would he be looking for? I don't know my self : )

Two U joints at the transfer case end. Stock has RZeppa. And it will be half the thickness.

 

[deathraceking66]

Wealth of knowledge ??thanks again peeps !!

 

[GATORB8]

Stock:

Aftermarket, this is a 1310:

 

[hoag4147]

Glad to join the jeep community . Just purchased my first jeep ever …. So not familiar with a lot of things related to the vehicle (usually owned sports cars)
Jeep is a 2020 rubicon recon , it did come with bead lock method wheels and 35’s … wondering if someone can clarify if this jeep was lifted by the pics below or if anyone Can point me in the right direction as to how to find out . Thank you in advance

Definitely got lift details from @GATORB8 Just FYI, the wheels are bead lock simulated I believe

 

[deathraceking66]

Will check on driveshaft in a few and send post pics … wheels are actual beadlocks i believe
https://www.methodracewheels.com/co...s/105-beadlock-machined?variant=7148112969764

 

[BDinTX]

Will check on driveshaft in a few and send post pics … wheels are actual beadlocks i believe
https://www.methodracewheels.com/co...s/105-beadlock-machined?variant=7148112969764

I thought they looked like the 305NV
305 | NV | Machined - Matte Black Lip – MR30568012300 – Method Race Wheels

 

[hoag4147]

I thought they looked like the 305NV
305 | NV | Machined - Matte Black Lip – MR30568012300 – Method Race Wheels

I was thinking that as well. Look at valve stem location. I believe the 105s stem sits inside.

 

[deathraceking66]

You guys are right , wheels almost look identical , how will I be able to identify ?

 

[BDinTX]

I think @hoag4147 nailed it with the valve stem

We have the 305NV in red on a 2020 sting grey recon lol

Water collects inside the lip and is a pita…

Sponsored