Need help getting drag link off pitman arm

[Terrymo]

I put a wrench on the upper drag link nut and it looks like it’s a 21mm but just wanted to verify as I don’t have a 20mm.

Great thread. I’m about to tackle this myself.
Thanks

Should be 21mm

Sponsored

 

[Odyssey USA]

Should be 21mm

Thanks. I ordered a Capri tools 3” long 13/16 torque adapter that should fit snugly because I couldn’t find a 21. That should let me get access to properly torque the nut.

In case anyone else is interested…
https://a.co/d/105WBsa

 

[Terrymo]

Thanks. I ordered a Capri tools 3” long 13/16 torque adapter that should fit snugly because I couldn’t find a 21. That should let me get access to properly torque the nut.

In case anyone else is interested…
https://a.co/d/105WBsa

Here’s another option that I’ve seen from SteerSmarts. I’ve not done this yet so I’m just speculating.
https://steersmarts.com/products/ye...wG1fNEcnEWHPAhS2n-dwhYvYZzzEdvHf8b61MomwejofA

 

[Odyssey USA]

Here’s another option that I’ve seen from SteerSmarts. I’ve not done this yet so I’m just speculating.
https://steersmarts.com/products/ye...wG1fNEcnEWHPAhS2n-dwhYvYZzzEdvHf8b61MomwejofA

Nice! I hope the one coming does the job. I wasn’t aware of that one. Looks stout!

 

[Blues Fan 30]

Digging up an old thread here but HELP. I tied up the drag link so its not drooping, hit with pb blaster last night and more today, tried heat, and am hitting the stupid pickle fork with a dang sledge hammer and the curse words are flying. Any ideas?

 

[Blues Fan 30]

Nvm got it...just had to get angrier with it. To he double hockey sticks with ever having to do that again.

Sponsored