Moto_21
Well-Known Member
- Thread starter
- #1
Gonna see if theres any interest, im thinking about selling my evo coilovers and maximus high steer bracketry with the draglink flip half of the yeti steer smarts. The coilovers have been rebuilt and new lower springs are added as well as AGM sliders, I have them valved for my preference but can put them back to the way they were from evo. My preference is firm. The only kicker is this would be just the coilovers as the brackets I have are different than the ons that came with the kit originally so the front and rear set would have to be purchased as well.
The kit front and rear on northridge is around 1100.
im looking to get around 2800 for everything. 4 coilovers, springs, extra set of springs, track bar flip, yeti high steer
also the maximus track bar flip would have some minor cutting done to it, two parts are welded to the bracket and I would have to cut the weld on the front edge to get it off.
The kit front and rear on northridge is around 1100.
im looking to get around 2800 for everything. 4 coilovers, springs, extra set of springs, track bar flip, yeti high steer
also the maximus track bar flip would have some minor cutting done to it, two parts are welded to the bracket and I would have to cut the weld on the front edge to get it off.
Sponsored