CTI RAMP PICS! Post em here!

[ogjeep]

Anyone get their rig up on a CTI ramp? If so what did you score and whats your set up?
I did 780 On Roam Adjustable Short Arms and Bypass shocks and highsteer kit, 37 inch tires. On my Sport.
Should be able to improve with some higher clearance fenders, and my longarms and coilovers i am currently installing

Sponsored

 

[RubiRob]

Score of 760 with basically a Mopar lift kit, 2-4.5" Falcon shocks and MC lower arms.

 

[ogjeep]

Score of 760 with basically a Mopar lift kit, 2-4.5" Falcon shocks and MC lower arms.

If you have Falcon shocks and MC lower arms all you have left mopar are the Springs! But nice!

 

[RubiRob]

If you have Falcon shocks and MC lower arms all you have left mopar are the Springs! But nice!

This is true!

 

[Cypher]

Score of 760 with basically a Mopar lift kit, 2-4.5" Falcon shocks and MC lower arms.

are you running a 2" bumpstop? ever have issues with this setup?

 

[RubiRob]

Not that I've noticed . I've since moved to synergy coils and stacking bump stops, and metalcloak arms and endlinks. No brand bias here lol

 

[Cypher]

Not that I've noticed . I've since moved to synergy coils and stacking bump stops, and metalcloak arms and endlinks. No brand bias here lol

@RubiRob you swapped to the 3" Synergy coils right? but at one time you were running Mopar springs with the longer Teraflex 3.3 shocks with no issues having the springs unseat correct?


I am looking at a 2" lift, but want to run the longer shocks myself. Synergy calls for the longer shocks for their 2" coils, but I was not sure about the Mopar coils with them so that's how I came to your old post.

I have a set of Mopar coils, and plan to buy the Synergy as well. my plan is to run the coil that I like the most after testing both. my main concern is buying the longer shocks called for by Synergy, but then if I like the Mopar coils more the shocks may end up too long. (or swap to other 2 to 2.5" coils later). I also am not brand specific, and plan to run whatever works best for me. I doubt I'll ever swap to 37s, so taller than 2" is way overkill for me. have Dirty Life DT-1 on order to go with my lift.

as of now, I am looking at the fox factory race piggyback shocks for a 3.5 to 4" lift. the specs are actually a little shorter than the Falcon 2-4.5" lift shocks that you were running so in theory these should work fine with the Mopar coils.

E- extended, T- Travel, C- Compressed.

king 0-2.5" lift shocks front E 25.44, C 16.12 rear E 26.81, C 17.5
king 3-5" lift shocks front E 28.87, C 18.11 rear E 30.00, C 19.24

falcon 3.3 2 - 4.5" lift shocks. front E 28.8, T 10.9, C 17.9 rear E 31.25, T 12.35, C 18.9

fox factory race 2-3" lift shocks front E 26.5, T 10.1, C 16.34 rear E 28.6, T 11.17, C 17.43
fox factory race 3.5 - 4" lift shocks front E 28.5, T 11.1, C 17.34 rear E 30.3, T 11.8, C 18.4

Mopar JL 2" lift fox shocks. front E 26.25 rear E 28.5

I tried to get the main shock specs, but was not easy to track down. these may be off as I have seen different specs on different sites. but should be close enough in case others are looking fo similar.

Sponsored