Assistance locating wires

[MyDaughters20JL]

I was going to install the SGW cable and hook up my reader, but I am unsure as to what plugs I need to unplug. I took a couple pictures under the dash hopefully one of the pictures are some of the wires that I need to unplug. Any and all assistance would be greatly appreciated

Sponsored

 

[Stuckinthesand]

I was going to install the SGW cable and hook up my reader, but I am unsure as to what plugs I need to unplug. I took a couple pictures under the dash hopefully one of the pictures are some of the wires that I need to unplug. Any and all assistance would be greatly appreciated

In your 1st picture that is the connectors you need to unplug, and plug into your sgw cable. The cables should be pretty close to your OBD port.

 

[MyDaughters20JL]

In your 1st picture that is the connectors you need to unplug, and plug into your sgw cable. The cables should be pretty close to your OBD port.

so basically, just the 2 "lone" plugs and not any of the 5 or 6 in the other bundle?

 

[Stuckinthesand]

so basically, just the 2 "lone" plugs and not any of the 5 or 6 in the other bundle?

Yep just those 2. Your sgw cable should have the same exact shaped ports so you can plug right into it.

 

[MyDaughters20JL]

Yep just those 2. Your sgw cable should have the same exact shaped ports so you can plug right into it.

TYVM

 

[Stuckinthesand]

TYVM

?

 

[DavidArmen]

First photo shows the security gateway module on the top with the two harnesses plugged in. This is what you need.
And the second photo shows your Alpine premium sound system amplifier with all of its connections.

Sponsored