2024 Order (still) Waiting Room

[msudawg]

After 492 pages, it seems like the traffic on the original 2024 Order Waiting Room has gone way down. I am guessing that many of those who populated the page have graduated and happily driving their Jeeps, which means they don’t have the time to come back.

However, I am guessing that there are those, like myself, who are still waiting on their 2024’s. So, I would like to start this page for those of us who are still waiting.

Anyone with me?

Sponsored

 

[Bill paulins]

After 492 pages, it seems like the traffic on the original 2024 Order Waiting Room has gone way down. I am guessing that many of those who populated the page have graduated and happily driving their Jeeps, which means they don’t have the time to come back.

However, I am guessing that there are those, like myself, who are still waiting on their 2024’s. So, I would like to start this page for those of us who are still waiting.

Anyone with me?

I’m with you I’ve been waiting since May 2 it finally went to production but it’s been there for 25 days now

 

[PotterJLUR]

Nov 28 order here. I'm guessing I'll see it by the end of March here at the dealership as I currently show an estimated ship date of 2-23-24, but we will see of that actually happens.

 

[ellunchboxo]

Nov 28 order here. I'm guessing I'll see it by the end of March here at the dealership as I currently show an estimated ship date of 2-23-24, but we will see of that actually happens.

Nov. order as well. Build complete.

 

[AZJL322]

Ordered Nov. 4th. I'm hoping it will make it out of production soon.

 

[Man of Steel]

I have been waiting 5 months as of 2/19/24 for my 2024 Wrangler Rubicon X four doors with High Velocty yellow , 3.6 Pentastar engine, full time 4wd automatic , cold air intake, front winch, factory sliders with assisted step, plastic sill protectors, rubber mats, doors off mirrors, and 4.88 gearing. Nothing but crickets! They have not scheduled for production yet. I ordered through Steve Boekman at Linn MO Jim Butler Jeep for a very good savings off MSRP. Steve has been great to work with and communicates well. However Stellantis does not communicate much without a special request to the factory representative. I had Steve send a request and found out that my order is still lacking something before it can be scheduled for production. At least I know my order is not lost in someones desk drawer and they are aware of it. I am hoping it will move to schedule for production soon. I still check online every day, I feel like an Obsessive Compulsive Disorder vehicle ID checker! I still can't imagine how good it will feel to see some movement towards production.

 

[msudawg]

I’m in a very similar situation. My order was 10/16/23 and confirmed with VON/VIN on 10/17/23, so only 4 months with no movement and still listed as confirmed. I ordered a 2024 Wrangler Rubicon X four doors-Anvil, with 3.6L Pentastar, full-time automatic, Warn winch, stainless steel sills/cargo tub, rubber mats, doors off mirrors, with the standard 4.56 w/35” tires. I ordered through Mark Dodge in Lake Charles, LA and they have been very attentive. They have also talked to their factory rep and hoping for a scheduled date soon. Like you, all we can do is wait and hope that something happens soon. Also hoping it will arrive as ordered and there aren’t any unexpected “surprises” to the standards/options available at the time of order. As of now, I’m not sure I would want to start over.

Best to you all!

 

[Man of Steel]

Correction of salesman name from Jim Butler Jeep: Steve Boeckman.

 

[morph860]

Rubicon X 4xe ordered 12/6/23. Grand Cherokee 4xe Anniv. ordered 2/5/24.

Both are in the "Order Confirmed" stage. I wouldn't be surprised if the GC was ready first.

 

[Man of Steel]

I would not want to start over either.The waiting process is too long and I feel it could have been managed better by Stellantis. The salesmen don't have any influence on production

 

[Kellis422]

I’m in a very similar situation. My order was 10/16/23 and confirmed with VON/VIN on 10/17/23, so only 4 months with no movement and still listed as confirmed. I ordered a 2024 Wrangler Rubicon X four doors-Anvil, with 3.6L Pentastar, full-time automatic, Warn winch, stainless steel sills/cargo tub, rubber mats, doors off mirrors, with the standard 4.56 w/35” tires. I ordered through Mark Dodge in Lake Charles, LA and they have been very attentive. They have also talked to their factory rep and hoping for a scheduled date soon. Like you, all we can do is wait and hope that something happens soon. Also hoping it will arrive as ordered and there aren’t any unexpected “surprises” to the standards/options available at the time of order. As of now, I’m not sure I would want to start over.

Best to you all!

It all seems so random. I have an almost identical build to you. The only differences are the stainless-steel sills/cargo tub and the doors of mirrors. My order was confirmed 1/9/24, Scheduled 1/30, in production 2/12 with an estimated delivery date of 3/16. There seems to be no rhyme or reason to the scheduling.

 

[HockeyRebel6]

Still on Scheduled.

 

[Man of Steel]

I’m in a very similar situation. My order was 10/16/23 and confirmed with VON/VIN on 10/17/23, so only 4 months with no movement and still listed as confirmed. I ordered a 2024 Wrangler Rubicon X four doors-Anvil, with 3.6L Pentastar, full-time automatic, Warn winch, stainless steel sills/cargo tub, rubber mats, doors off mirrors, with the standard 4.56 w/35” tires. I ordered through Mark Dodge in Lake Charles, LA and they have been very attentive. They have also talked to their factory rep and hoping for a scheduled date soon. Like you, all we can do is wait and hope that something happens soon. Also hoping it will arrive as ordered and there aren’t any unexpected “surprises” to the standards/options available at the time of order. As of now, I’m not sure I would want to start over.

Best to you all!

That Anvil color is going to look awesome!Great combo on your order.

 

[GSM55]

Still here with you

 

[Bill paulins]

Unfortunately in production doesn’t mean much mine was in c status on May 2 and went to in production on 1-20 it’s been there for 27 days now, I am at wits end and so over it ?

Sponsored