2020 Rubicon Replacement Wheels

[BadAssBumbleBee]

Here you go, your stock set vs that new wheel w/ your stock 285/70 tires
https://www.wheel-size.com/calc/?wh...-17X8.5ET10&wcl=1.25in&fcl=2in&scl=2in&sr=0in

Thanks @blnewt , I probably should also have mentioned that I was planning on going with a 315/70/17 tire on the new wheels, which is why I wanted to know how much further the new wheel/tire combo would stick out compared to my stock setup.

What I was really trying to figure out is where you got these figures from where it says "Specify Parameters;
- Fender clearance (50mm)
- Wheelwell clearance (32mm)
- Suspension clearance (50mm)
- Scrub Radius (0mm)

Are those figures for any JL, for JL Sport/Sahara, or for a Rubicon?

Sponsored

 

[blnewt]

Thanks @blnewt , I probably should also have mentioned that I was planning on going with a 315/70/17 tire on the new wheels, which is why I wanted to know how much further the new wheel/tire combo would stick out compared to my stock setup.

What I was really trying to figure out is where you got these figures from where it says "Specify Parameters;
- Fender clearance (50mm)
- Wheelwell clearance (32mm)
- Suspension clearance (50mm)
- Scrub Radius (0mm)

Are those figures for any JL, for JL Sport/Sahara, or for a Rubicon?

I don't use that specify parameter section, I just plug in the stock vs new set and check the difference w/a measure out on my JL.
Here's that 315 set vs stock on yours
https://www.wheel-size.com/calc/?wh...-17X8.5ET10&wcl=1.25in&fcl=2in&scl=2in&sr=0in

 

[BadAssBumbleBee]

I don't use that specify parameter section, I just plug in the stock vs new set and check the difference w/a measure out on my JL.
Here's that 315 set vs stock on yours
https://www.wheel-size.com/calc/?wh...-17X8.5ET10&wcl=1.25in&fcl=2in&scl=2in&sr=0in

Got it, thanks for the clarification

 

[21RubiconZ]

Here you go Axe Chaos on 37X13.50

Looks great! Are those the -40mm offset?

 

[RED-FOX]

Looks great! Are those the -40mm offset?

Yes they are -40 offset

 

[Amaruq]

The New KMC Roswell wheel looks awesome, good alternative to those tank looking wheels.

Ooh yes! Since 1552 can’t stock their analogs, these are an excellent alternative at the same weight! Thanks for posting.

Sponsored