dynatrac

Join @Tech Tim in the Northridge4x4 studio as he gives a run down on some of the more popular ball joints we carry here at Northridge4x4. Ball joints featured: Apex Chassis Front Ball Joint Kit (Non-Knurled)...

Hey y'all, I just joined this forum and could really use some guidance concerning upgrades on my JLU. I figured I'd give you a rundown at what I've put into my rig. 2 years ago, I bought my 2022 JLU Sport Altitude new from the dealer, and because I was only 20, I had no idea if I wanted to do...

When I ordered my Rubicon, I was thinking that the factory front/rear D44's would have enough beef to support 37's with minimal upgrades, but the closer I get to upgrading components, the more I think swapping out at least the front axle might make more sense, but then what's stopping me from...

Have decided on Clayton control arms and track bars; however, unsure to use the Clayton 1.5” coils with standard Fox 2.0s or the Dynatrac EnduroSport coils with tuned Fox 2.0s. Does anyone have experience with both? JLUR soft top on 35s. Daily driver wanting to do some moderate trails. Not...

Inferno Unleashed: Jeep Wrangler Transformation by Rebel Off Road Discover the jaw-dropping modifications and upgrades that make this Jeep Wrangler stand out from the rest. Jeep Wranglers are a symbol of adventure and freedom, and there's no denying their off-road capabilities. But when Rebel...

We told you more deals were coming.... we're getting closer to the big BF/CM weekend!

Who is running a Dynatrac 2” on their 2.0T? The reviews on this lift are exactly what I am looking for, but it’s listed for just the 3.6. I called Dynatrac and they said that it would bolt on, but that it would not ride the same, as it is tuned specifically for the 3.6. I know I have seen...

I have a '21 Rubicon 392 that I've had a for a few months now, and I want to upgrade the axles. I'm looking at the Elite ProRock XD60®/80 Axle-Set for Jeep JL But there is this notice on the product page: "NOTE: This package does not fit with Jeep Wrangler Rubicon 392 or 4xe models." Crap! I...

Hey gang just had this lift kit installed on my 21 Willys 4dr, and one of the main reasons I chose the Dynatrac is due to all the reviews I read about how this lift with the tuned springs rode as good if not better than the stock suspension. After a day of driving (still on stock wheels and...

Hello I have a interesting question and wanted to see if anyone’s done it before. First off I own 2 JLU’s, my wife’s 19 sport and my 20 rubicon. It’s not as fun as it sounds. You spend money quicker when you have two The wife’s sport has a dynatrac 2 inch lift, and mine a teraflex st2 with sp2...

Going up soup bowl on the rubicon trail with snow & ice 12/12/2020. Here is link for full video: Looking for sponsors ?

I have a 2020 JLUR, that will be used easy to difficult trails. Now I am trying to decide between the KM234 and KM235 beadlocks with 39x13.5x17 tires to go with my dynatrac XD60 axle set. Some of this might be a personal taste, but trying to find out if anyone here have recommendations based on...

I'm entertaining the idea of selling the Jeep as my automotive interests have shifted in another direction. I'm located in North Chicagoland 12,241 miles (will go up slightly) Granite Crystal Metallic Black cloth interior 3.6L V6 Manual 6-speed transmission 3 yr / 36K miles warranty 5 yr / 60K...

Looking for an ultimate dana 60 rear axle complete with 5:38 gears and e locker.

I'm sorry if this has been posted before. I searched and could not find anything this specific. I'm going to run the tread off the factory 33s that come on the Rubicon. Once I accomplish that, I want to do a 2" lift and put the Nomad wheels on. I haven't made a firm decision on the lift kit...

Those who have gotten the Dynatrac EnduroSport 2" lift, did it sit at a true 2" (and what else is on your jeep)? Also would be nice to know what other parts you bought with the lift, if any. Have heard that you don't need anything else, but I'm curious to know if there's anything that would make...

Received the Dynatrac EndurSport 2in lift yesterday and reviewed the parts list to make sure I had all the components. I noticed that the springs for the front and rear had different part numbers than the included documentation. Per the instructions the part numbers are: Front Coil...

Who is ready for some seriously stout axles? Dynatrac Elite 60/80 axle sets for the JL is an easy way to gain some serious BEEF under your Jeep and Northridge4x4 has these in stock ready to ship. Why wait for months to get a set of custom axles? We can get you set-up now! These come ready to...