Whats up guys,
Hope you are all doing well!
So, as i'm preparing to hook up my JLU Rubicon to be an overlanding vehicle that I can live in for very long periods of time, Im finding that the total cost of everything I need is waaayyyy higher that the money I have to spend on it and it seems...
Approx replacement time took .25 of a beer.
The replacement Mopar Cabin Air-Filter costs approx $27.00 dollars total including shipping. I’m sure you can get them for less with a little research.
*Beware, dealerships typically charge $50-$70 labor/material for this replacement. It’s far too...
I just installed a KC HiLites M Rack with area lighting and gravity pro6 light bar on my wife’s Jeep! Check it out! I also did a comparison video between the KC lights and common led lights; I’ll post that video under discussions.
Hey guys, I’ve recently made a set of quick connects for my JL with brackets to hold them up, and I’ve been on the trail several time’s since and they’ve held up great! I made my own pins from scratch, however you could purchase pins that would be suitable. Check out the video! If you have any...
I recently did a DIY on interior and tailgate area lighting; I didn’t take pictures however I did do a DIY video on YouTube. I’ll leave the link below. Any comments or questions are welcome; leave them in the forum or the video! Thanks for watching!
So, recently I had made a rear storage rack for my JLU out of some junk laying around the shop. I didn’t take any pictures of the build, however I took a video and uploaded it to our YouTube channel if you guys want to check out! I’ll share the link below!
Ok like many of you, I haven't been a fan of how dim the dome lighting system is, even in the 2019 model. I came across a pair of low power rock lights by Rigid and hoped I could make an improvement without making a mess of things.
Taking down the dome light fixture in the JL really isn't...
Passenger side lines up perfect, drivers side there is a gap. Lowered the windshield and tightened back up, didn’t help. I stuck a piece of foam in it to get rid of the wind leak but was wondering if I could adjust the front of the soft top to fit it flush. I really don’t want to go to the...
Approx Install Time .50 mins. It took me (1) cigarette and .50 of a beer.
Rugged Ridge 2” Tow Hitch Receiver Features:
Heavy Duty 2-Inch Receiver Hitch
Designed to Match JL Towing Capacity
Capable of 3,500 Pounds Towing Capacity
With Tongue Weight of 350 Pounds
One-Piece Welded Assembly
Hey there Jeep friends!
I just wanted to document and share the results of my Homebrew 2 Door Lift kit.
The purpose of this is to obtain a mild amount of lift on a budget. Perfect for someone who may be stretched a little thin from their new big purchase or someone who just doesn't want to run...
Very quick and easy install.
Approx Install Time .50 mins. It took me .25 of a beer.
The Mopar Tailgate Table can hold up to 25lbs and is made of metal that is coated.
1/2” Drill Bit
T-30 Torx Bit
Trim removal tool
You will be provided in the kit the...
While waiting for the arrival of the Mopar Soft Top Window Storage Bag, I decided to see what DIYer could do without any sewing required. I actually found some of the same vinyl covered felt used by the Mopar bag at the local Joann fabric store. This is the exact same stuff, same as Bestop uses...
Here's my printable DIY Instructions for building your own Hard Top Cart based off of @Texas_Yote 's build and an updated Door Holder Cart based off an outdated "Instructables.com" build. Basically $165 Total for both carts! You save money and have your own touch on it! I was about to drop $200+...