What did you do TO your Jeep JL today?

[bpdunsta]

Replaced the stock KM2s with some Rubicon take-off KO2s yesterday -- spent a couple hours today cleaning all 10 tires Visually, not much difference (KM2s on top; KO2s on bottom), but the noise difference is night and day! So far, so good. If anybody is interested in the KM2s, check out my post in the Member Marketplace....

 

[melendez69]

Disclaimer: I suck and don't feel like going through the rest of this thread to see if anyone else already asked this...

Is there anyplace where the fender liners and outer fender does not match up? Is there body paint showing through? I really want liners without a logo, but the giant gaps I keep seeing are making my eye twitch.

Hi, Michelle (welcome back!). The fenders don't cover much of anything underneath. You can see what's exposed here in the wheel well, and after some messy & muddy wheeling this past weekend, this here is the result after a quick cleaning. I don't like all the exposed bitty bits all that much, but I like the look of the inners. I plan to cut up the stock liners & fit them underneath to keep all the dirt out.

These are the only liners I've seen that don't have a giant, gaudy logo. I'm waiting on their rears to be available. I'm sure there are some that cover much more than these. Metalcloak makes a decent pair (logo dead center), and AAL makes a nice pair that covers up a little more. I like them and they look great, but I don't care for the visible logo.

https://www.jlwranglerforums.com/fo...dventure-lab-inner-fenders.34884/#post-789410

 

[MALL R8D]

Hi, Michelle (welcome back!). The fenders don't cover much of anything underneath. You can see what's exposed here in the wheel well, and after some messy & muddy wheeling this past weekend, this here is the result after a quick cleaning. I don't like all the exposed bitty bits all that much, but I like the look of the inners. I plan to cut up the stock liners & fit them underneath to keep all the dirt out.

These are the only liners I've seen that don't have a giant, gaudy logo. I'm waiting on their rears to be available. I'm sure there are some that cover much more than these. Metalcloak makes a decent pair (logo dead center), and AAL makes a nice pair that covers up a little more. I like them and they look great, but I don't care for the visible logo.

https://www.jlwranglerforums.com/fo...dventure-lab-inner-fenders.34884/#post-789410

Thank you for the pictures. The logos drive me insane too. Unless someone is sponsoring my Jeep (which isn't going to happen), I don't want to be a billboard. I considered Skull Krushers, but I can't find real world pictures of their fender liners on a JL.

 

[Jeepney18]

Nice rack

Do you have to drill any holes to install the rack?

 

[melendez69]

Thank you for the pictures. The logos drive me insane too. Unless someone is sponsoring my Jeep (which isn't going to happen), I don't want to be a billboard. I considered Skull Krushers, but I can't find real world pictures of their fender liners on a JL.

Those seem to have more pictures than logos, and all I've seen are basic stock photos. They have more material, but they ain't gonna cover much of anything inside the top of the well.

 

[Roky]

Those seem to have more pictures than logos, and all I've seen are basic stock photos. They have more material, but they ain't gonna cover much of anything inside the top of the well.

I went with artec because of the quality of their products and coverage. I don’t mind the gigantic A stamped on it, which I don’t understand considering my ocd.... I’m considering going with Freedom edition when I get the fronts........

 

[Killed by Death]

I went with artec because of the quality of their products and coverage. I don’t mind the gigantic A stamped on it, which I don’t understand considering my ocd.... I’m considering going with Freedom edition when I get the fronts........

UR not too OCD....UR center cap isn't lined up with the valve stem

 

[Roky]

UR not too OCD....UR center cap isn't lined up with the valve stem

Oh crap, thanks, I’ll take care of that tomorrow, yeah right, who am I kidding, I’m on the way out to garage as I’m typing.. ....

 

[Kenny]

Told her I love her.

What did she say?

 

[Chipe]

Well, today I finally got the parts for my new 2018 JLUS so I:
Installed the 1 5/8 wheel spacers
Installed Smittybilt SRC Gen2 Full front bumper
Installed Smittybilt XRC 9500 Winch
Rough Country Spare Tire lift

Previously before picking it up at the dealer:
2" Mopar lift
34.2 Michelen's put on stock rims
Trailer hitch and harness
Aux switches put in
Mopar Flag hood decal

Then took it in this afternoon to the detailer and am having it ceramic coated.

It's got 55 miles on it now. Can't wait to do some driving/off-roading.

Still to come:
Rock sliders with removable steps (for my lovely bride of 43 years)
Rear M1 bumper
D rings for front bumper
De-badging
Rough Country Tailgate stabilizer (on order)

That's all for now.

 

[YarrrMatey]

Today was yesterday, Dynatrac Endurosport lift install, Method MR701 and 35” Ridge Grapplers sometime this week

Received in the mail today, Tailgator, so an install later this week

 

[emilboya]

Do you have to drill any holes to install the rack?

No Sir! no drilling at all

 

[Kraty1]

Replaced my door hinge mirrors that shook like crazy with the Lange Coyotes and am very impressed. Super quick to install, no movement whatsoever, and the view is insane. Thanks to the forum for the suggestion!

 

[Ricmcd]

The blue on the leather looks a little lighter than the pictures on their website. Is it lighter or just an optical illusion?

Also, your Jeep is stunning

G

The blue on the seats is different than the Ocean Blue but it goes very well with the OB. I was worried until I saw it and then I don’t think I could have picked a more complimentary blue

 

[AnthemAVM]

Replaced my door hinge mirrors that shook like crazy with the Lange Coyotes and am very impressed. Super quick to install, no movement whatsoever, and the view is insane. Thanks to the forum for the suggestion!

You need a foot rest.