jlsahara
Well-Known Member
Bought the satin inserts from Mopar and installed them.Are those inserts or did you paint them? Looks fantastic btw!
Sponsored
Bought the satin inserts from Mopar and installed them.Are those inserts or did you paint them? Looks fantastic btw!
Can you send me the eBay link for the grill inserts?Installed Carbon Fiber Side mirror covers (eBay) and black grill inserts. I will be installing the fog light bezel covers tomorrow.
![]()
![]()
![]()
The side mirror covers were from eBay. The inserts were from allmoparparts.com. The inserts from eBay are only for Sport models.Can you send me the eBay link for the grill inserts?
Jamie, what’s up? Good to see you on here. We should take the Rubicons out sometime! -StuartFinally got our Jeep back from SEMA, picked it up this morning from Wet Okole. It was an awesome experience and we made a good friend along the way, Aloha Tracy!
My son and I wasted no time putting wrenches on the Jeep and we installed the Flowmaster American Thunder muffler delete. We are going to use the space made available from dumping the muffler to mount the VIAIR onboard compressor system, at least that's the plan...
Four words about the Flowmaster install: Exhaust Pipe Expander Tool. Other than that enjoy this video I did not make that sums things up nicely. We did not remove the brackets like he did in the video. Just loosen the clamp and sprayed a little WD40 on the rubber mounts. Then just push with your foot on the opposite side of the muffler (each side, left, right) and the hangars pop out easy peasy. We ended up renting a Exhaust Pipe Expander cause that little bugger was T I G H T!
Here is a pic of the pipe installed. It was too dark yesterday to get a shot.
![]()
Wife has not driven it yet so I remain married another day... Is it loud? Not to a retired Navy hole snipe. It is not for the timid. Touch the throttle and you hear it plenty but it does quiet down at cruising speeds.
I imagine this is something they can fix, even in the winter...Got this done today...
![]()
Sure, a computer flash can be done anytime. Problem is, the dealer may want to hear the loud fan noise before they will do the fix.I imagine this is something they can fix, even in the winter...
How much light does this add/ what are you using it for?Added some Rigid A-series lights on each side and cut a piece of clear bra to go behind each light to protect the paint
![]()
![]()
![]()
Love the rear facing light, can i have the info on that setup please.Yesterday posted some pics of lift, 35's and rims, however, this is everything else I've added in the past 2 weeks:
Mopar 2" lift
Mopar 17 x 8.5 x +12mm rims
Tereflex Falcon adjustable steering stabilizer(HUGE difference, highly recommend!!)
RAM mounts on ebrake and grab handle
Hr3 extinguisher with Drake mount
Cargo organizer bar
Buck knive and smitty saw (roll bar mounted)
Jeep molle bags
Antenna quick disconnect
Jeep performance badges on a-pillar mounts
Clear lens cover(smoke lens delete) for spare mount Rigid light
Willys decals for new rims
Dirt Bagz rear seat storage
Mopar side steps
Had computer flashed w/ the official Mopar contract
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
What Velcro straps are you using for the Drake and how are they holding up?Yesterday posted some pics of lift, 35's and rims, however, this is everything else I've added in the past 2 weeks:
Mopar 2" lift
Mopar 17 x 8.5 x +12mm rims
Tereflex Falcon adjustable steering stabilizer(HUGE difference, highly recommend!!)
RAM mounts on ebrake and grab handle
Hr3 extinguisher with Drake mount
Cargo organizer bar
Buck knive and smitty saw (roll bar mounted)
Jeep molle bags
Antenna quick disconnect
Jeep performance badges on a-pillar mounts
Clear lens cover(smoke lens delete) for spare mount Rigid light
Willys decals for new rims
Dirt Bagz rear seat storage
Mopar side steps
Had computer flashed w/ the official Mopar contract
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Mopar relocation bracket w/ Rigid industries dss-side shooter driving beamLove the rear facing light, can i have the info on that setup please.
Holding up very well, does not move...just google velcro straps and get 2-12" and 2-16". 12's for inside and 16's for outsidesWhat Velcro straps are you using for the Drake and how are they holding up?