What did you do TO your Jeep JL today?

[TroyBoy]

I'm curious as to why you changed from the Mopar lift to Rock Krawler?

The RK lift has firmer springs and more flex with the control arms. I wanted springs that were a bit firmer for towing. Stock control arms don’t flex very well.

Sponsored

 

[Brew211]

There are a few on eBay. I got mine from Moparwholesaleparts.com

Part 6BN67TX7AC

Thank you so much, just ordered. Easy install?

 

[jlsahara]

Thank you so much, just ordered. Easy install?

If you follow the directions on the thread it is pretty easy. Less than 30 mins.

 

[Brew211]

If you follow the directions on the thread it is pretty easy. Less than 30 mins.

Thanks man!

 

[#1 for me]

I looked at my JLUR order and drooled on it a little bit.
Can’t wait till it gets here.

I'm doing the same thing !

 

[vonbek]

Strapped on the paddle board

Mojito Mohawk!

 

[POL]

I finally got my Fox Performance Series 2.0 IFP Shocks 3.5" - 4"
Fronts: FOX985-24-179
Rears: FOX985-24-180
I started with a Mopar Lift but then quickly changed to a Rock Krawler 2.5" xfactor lift. I can't really tell if there is a ride quality difference but I bought them for the extra 2" of wheel travel.

Fronts (old vs new)

Rears (old vs new)

So, the FOX 2.0 IFP look to have a smaller external diameter compared to the "Fox Mopar" ones ?

I thought they were the same except the full length...

 

[Cwelroy]

Changed out the transfer case shift knob finally! Check out the interior mods section for a thread by @Roky that shows the instructions on how to get the old knob off. It is SO much easier than it was on the JK once you figure out what you’re doing.

 

[lowZX14]

Changed out the transfer case shift knob finally! Check out the interior mods section for a thread by @Roky that shows the instructions on how to get the old knob off. It is SO much easier than it was on the JK once you figure out what you’re doing.

Ok, so I need this in mine lol. Where did you find that shift knob?

 

[American Jeeper]

Mojito Mohawk!

Nice, that’s what it looks like for sure!

 

[Cwelroy]

Ok, so I need this in mine lol. Where did you find that shift knob?

https://www.quadratec.com/products/...MIn_S-gsqS3gIVCZ7ACh0xGQ2nEAYYASABEgJ3sPD_BwE

I had it on my 2017 JK Rubicon for like a month before trading that in for the JLU Sahara. There are cheaper ones with plastic baseballs. This is the real deal leather one tho.

 

[Tl5glenn]

Getting my mopar 2” lift on today!!!

Before pics...

Will post pics when done....

 

[Titan2727]

installed the Rear Sport bar flashlight mount from Maxiums-3 but put another Element Fire Extinguisher 100 in. So I have one upfront by driver side and one in back now. Plus I used the one over the passenger side to mount an actual flashlight.

Not trying to be a jerk, but what is that little thing supposed to do? Put out matches?!

How much chemical does that hold, looks very small..

 

[Rhinebeck01]

@Jeepmarkjl

I'm not sure how much you know about that little fire extinguisher... but it uses a technology developed for the space program in fixed installations. I think it is an Italian offering..

This hand held unit that fights fires by emitting a gas that interrupts the chain of combustion.

It's a totally clean extinguisher that does not rob oxygen and is totally safe and non-toxic and does not make a regrettable mess lets say when you use it...

I have more then one friend with high end sports cars, that have this extinguisher in their cars...

@Jeepmarkjl Can you tell how you mounted the holder. Did you use existing screw holes, had to drill or what?

 

[Titan2727]

@Jeepmarkjl

I'm not sure how much you know about that little fire extinguisher... but it uses a technology developed for the space program in fixed installations. I think it is an Italian offering..

This hand held unit that fights fires by emitting a gas that interrupts the chain of combustion.

It's a totally clean extinguisher that does not rob oxygen and is totally safe and non-toxic and does not make a regrettable mess lets say when you use it...

I have more then one friend with high end sports cars, that have this extinguisher in their cars...

@Jeepmarkjl Can you tell how you mounted the holder. Did you use existing screw holes, had to drill or what?

Isnt that what a "normal" extinguisher does?

Sponsored