What did you do TO your Jeep JL today?

[POWDO]

Hate to be that guy but its not a car

Every time someone calls a Jeep a car, God kills a kitten.

Sponsored

 

[jlsahara]

Should have been simple, however, there are 2 hidden T20 screws underneath attaching the cup holder to the console. You have to remove the 10mm bolts located under the plastic covers toward the back to lift the console up to gain access to the T20 bolts underneath.

Here are the pics that came with the holder - they left out the knuckle-cutting screws underneath

I just installed this. I can't believe this doesn't come standard.

Thanks to ERIXJLUR and Bill 13 for the help!

 

[islandtees]

You hunt with this? You must have a really strong arm.

I do, I can throw it 100 yards. LOL

 

[dragonslayer]

Too many posers on this site. I like to post what really brings me joy and she sits in that stroller

Goheels050917 - 2
Posers - 0

 

[Goheels050917]

How is that Fabtech shelve with the soft top? Are you able to but the soft top all the way down? I have the Ace shelve and it hits the shelve.

I cant put to down all the way, which isn't a big deal. I usually just do the safari mode and it's all good. I prefer if that way since the top flips back.

 

[Jjirish]

A deep cleaning

AND added rear cup holders

For the rear cup holders.... did you need to remove the entire console to switch out the tray and install the cup holders or was it just a quick flip out job?

 

[IronScott]

For the rear cup holders.... did you need to remove the entire console to switch out the tray and install the cup holders or was it just a quick flip out job?

Some good instructions here. Takes a bit of work but doesn’t look too bad.

https://www.jlwranglerforums.com/forum/threads/jl-non-rubicon-cupholder.9882/page-2#post-255075

 

[ERIXJLUR]

For the rear cup holders.... did you need to remove the entire console to switch out the tray and install the cup holders or was it just a quick flip out job?

you have to lift the rear of the console high enough to access 2 T20 torx screws that are located under

 

[Jjirish]

you have to lift the rear of the console high enough to access 2 T20 torx screws that are located under

Thank you!!

 

[Jjirish]

Some good instructions here. Takes a bit of work but doesn’t look too bad.

https://www.jlwranglerforums.com/forum/threads/jl-non-rubicon-cupholder.9882/page-2#post-255075

Thank you!!!

 

[Kenny]

Too many posers on this site. I like to post what really brings me joy and she sits in that stroller

I have some bad news - as the father of 5 daughters all over the age of 14 now - once they get out of that stroller, they will squeeze that joy out of you to the point you need to get a Jeep that you can disappear into the hills for days and recharge. But for now - enjoy.

 

[aml]

I did this a little bit ago and I know it isn’t the only one, but I like it!

 

[Jjirish]

I have some bad news - as the father of 5 daughters all over the age of 14 now - once they get out of that stroller, they will squeeze that joy out of you to the point you need to get a Jeep that you can disappear into the hills for days and recharge. But for now - enjoy.

And then they start telling you what kind of custom jeep they want for their 16th.... smh

 

[Kenny]

And then they start telling you what kind of custom jeep they want for their 16th.... smh

So true...

 

[Jeepmarkjl]

My kids asked me why I need a GIANT Spork.

Um I turned the shovel over and I found this....

Sponsored