What did you do TO your Jeep JL today?

[CalsJLUR]

I put on 35/12.50R17 BFG Mud terrain KM3 and Method 17" 312.

Looks great! How do you like the KM3’s?

Sponsored

 

[Calijeep]

I put on 35/12.50R17 BFG Mud terrain KM3 and Method 17" 312.

Looks very good. I have the same wheels in my garage waiting to get installed.

 

[jeremyjeep]

Don't have aux switches (yet) and don't have a tow harness (yet again..), so tapped into my tail lights to add some cheap lights so I can see backing up in the dark. Temporary but they work pretty good, $12 upgrade!

Do you have a link to the light’s purchase location? How did you mount them, any drilling required?

 

[Raskass77]

Flexing next to a srt

 

[Warpath]

Installed Rustys trackbar support bracket:

 

[Kenny]

Had a custom decal made and was able to get on without destroying

 

[Jeepmarkjl]

Found a space saving and more effective fire extinguisher option. The Element 100 Fire Extinguisher mounted on the Maximus-3 Flashlight Mount. I added the mount to both driver and passenger side. Will be adding for the rear sport bar mount next week to have fire solution front and back. The Element provides ABC and K protection and lasts over 100 Seconds which is more than 10x of a normal 5lb extinguisher. Not cheap but its my Jeep so... The Maximus brackets are rock solid. No rattle. 2 min install. And I like the way it looks.

 

[JIMBOX]

I added a set of 'MOLLE BAGS"

Pretty cool

JIMBO

 

[jdthird]

WIred a radar detector into Aux 3 and a dash cam to Aux 4 since I was fed up with the horrible options for the lighter plug power source.

 

[Euro JEEP]

WIred a radar detector into Aux 3 and a dash cam to Aux 4 since I was fed up with the horrible options for the lighter plug power source.

Hi, would you be able to do a write-up on this please?

 

[jdthird]

I could, but I don't think there's anything I can really add that isn't already in this thread - https://www.jlwranglerforums.com/fo...es-configuration-installation-diy.1477/page-9

This is where I got my info from, photos for the harness and a video from American Jeeper that shows the details of what I did better than my photos would...

 

[TJEli]

Wax.

 

[obwahn]

Installed my ACE sliders. Had to make a minor adjustment to the pax side Rubi rail to move it away from the slider. Driver side was perfect.

 

[Titan2727]

Finished up the CB install! I used the CoolTech mic mount.

What do you have for a CB antenna?

 

[Bingy]

Flexing next to a srt

While blocking the handicap access lane...yes the blue striped area...nice.

Sponsored