What did you do TO your Jeep JL today?

[Rad vlad]

A couple of weeks late due to the hurricane but finally got the diff’s installed
Also picked up a 18 grand cherokee high-altitude for the wife

Sponsored

 

[Ike582]

Bought the same one...its AWESOME. Little bit of a pain to install but totally worth contorting your body in able to tighten the bolts.

I installed mine this morning, and I'd say you need to be an absolute contortionist to get it installed. One hint for anyone who is installing one. As you try to fit the pedal assembly onto the backing plate, you risk knocking the backing plate bolts out of the holes where it will fall away to an inaccessible spot. Here's the key: Once you fit the backing plate bolts through the holes, shove a thick piece of wood or other stiff material between the backing plate and the firewall, so that you can safely install the pedal assembly and get the nuts tightened. It's also very challenging to reach the nuts so use a ratchet set with a long extension so you can get good leverage on the nuts.

 

[Neanderthalman]

Did her nails, took a detour on a grocery run, and erased all evidence of fun.

Also installed cargo mats and all weather mats. Nobody needs more pictures of those. Considering a full carpet delete for the winter.

 

[obwahn]

Did her nails, took a detour on a grocery run, and erased all evidence of fun.

Also installed cargo mats and all weather mats. Nobody needs more pictures of those. Considering a full carpet delete for the winter.

Totally agree on the doing the nails. Simple job that adds a lot I think.

 

[Mid-life Wrangler]

I installed mine this morning, and I'd say you need to be an absolute contortionist to get it installed. One hint for anyone who is installing one. As you try to fit the pedal assembly onto the backing plate, you risk knocking the backing plate bolts out of the holes where it will fall away to an inaccessible spot. Here's the key: Once you fit the backing plate bolts through the holes, shove a thick piece of wood or other stiff material between the backing plate and the firewall, so that you can safely install the pedal assembly and get the nuts tightened. It's also very challenging to reach the nuts so use a ratchet set with a long extension so you can get good leverage on the nuts.

Yeah, pain to install, but worth it. I installed mine on Thursday.

 

[Mantacon]

Ordered the rockslide engineering steps at the off road expo today. Also got some reverse leds.

 

[IPvFletch]

Looks good, how did you "delete the carpet" - do you have to unbolt the seats???

 

[vhfan5150]

Added some steps this weekend to make getting in and out easier for the kiddos. And they had to pose with them.

 

[cwadle]

Went overkill and bought mopar 7 inch lights, mopar 5 inch lights, and a rough country 30 inch light bar. Bought to turn night to day. Oh well

 

[Firstwave]

Did her nails, took a detour on a grocery run, and erased all evidence of fun.

Also installed cargo mats and all weather mats. Nobody needs more pictures of those. Considering a full carpet delete for the winter.

I had my dna tested with 23&me and found out I was Neanderthal. Wonder if we're related? On a more serious note the more I see this color the more I dig it. Nice Jeep

 

[Warpath]

Plasti-dipped my wheels bronze

 

[Edorand]

Took off the spare..swing gate is so much lighter!

 

[jfox]

Added some wheels and tires... jumped up to 35's.

Did a little test flex in the front yard.... need to really test it out to see if it rubs.

 

[Tpham]

Washed and waxed her and made her some headliners. Don't know what the total cost was. Had coupons at Joann's and sound skins left over.

 

[TA1ton]

Sprayed my grille with plastidip today...also sprayed my emblems a few weeks ago...I’m really diggin’ the look!

Sponsored