What did you do TO your Jeep JL today?

[szobell]

Look at the pic I posted. Just as good as the stock camera.

Looks fantastic!! Will you post the link to the camera you used?

Sponsored

 

[Truax]

I got my cb and front bumper 90% installed. Tank Offroad helped me out with some pictures to make the install on the bumper go easier since there were no instructions. I need to button a couple more things up and I'll be ready to head to Moab on Friday.

 

[Jeepmarkjl]

Installed and wired a ARB 50qt fridge and slide on the driver's side. It's a very tight fit but the tailgate closes easily and both back seats are up and locked.

Details on wiring and power?

 

[Impy5]

As requested...

Headlights ONLY (halogen lamps w/LED bulbs installed):

Mopar Fog Lamp assembly ONLY (this is the actual mopar led fogs that come w/the Rubicon bumper. This is not a plug-in bulb, but the entire assembly):

Both Halogen headlamps w/LED bulbs AND Mopar Fog lamps are ON:

I'll try to find a darker road to take pics, but it's difficult being in the city.

Was the Rubicon bumper with LED fogs a simple plug and play or did you have to get an adapter for them to work?

 

[BeerGuyNS]

Ordered some MOLLE bags and got a tailgate setup completed today! I couldn't get the MOLLE bags snaps through the louvres... picked up some $ store velcro straps and we're good to go. Large one has a first aid kit, one for the survival kit, the other for miscellaneous.

 

[Rad vlad]

Ordered some MOLLE bags and got a tailgate setup completed today! I couldn't get the MOLLE bags snaps through the louvres... picked up some $ store velcro straps and we're good to go. Large one has a first aid kit, one for the survival kit, the other for miscellaneous.

I went this way

 

[Iwant2poop]

Ordered some MOLLE bags and got a tailgate setup completed today! I couldn't get the MOLLE bags snaps through the louvres... picked up some $ store velcro straps and we're good to go. Large one has a first aid kit, one for the survival kit, the other for miscellaneous.

Like the bags. Which ones are they?

 

[TaiMc]

Was the Rubicon bumper with LED fogs a simple plug and play or did you have to get an adapter for them to work?

The rubicon bumper installed with no issues and the LED fogs were a simple plug and play because they were a compatible fit to be installed on the rubicon bumper. I went to a dealership and gave them a VIN of a Rubicon 2018 JLU wrangler and they ordered the Mopar Factory LED Fog lamp assembly associated with that VIN. This is why it was a simple plug and play. These are not aftermarket LED fogs.

Keep in mind that the Rubicon bumper and the LED fogs that I ordered are compatible. My sport Halogen Fogs were not compatible with the Rubicon Bumper that I purchased (as there was no aftermarket bracket available for a Base Sport Fogs -> Rubicon Steel Bumper at the time), so this is why I had to purchase the Mopar LED Fog lamps separately through the dealer.

@TTEChris did the install for me. If you have any questions about how easy it was, definitely send him a message! Thanks!

 

[TaiMc]

Mounted my Wheels/Tires. It's nice to be able to finally drive my Jeep again Wheels are temporary since my wife has claimed them for her build..... I will be removing the lower portion of the fenders in the near future, just not looking forward to the white that will be shining through when I do(I know I can paint/bedline it, but that is never a job I enjoy )

Yayyy!

 

[TaiMc]

Dammit Chris, that is so badass. You’re becoming a bad influence on me. Stop it!

ROFLLLL! +1 on this comment! It's the truth!

 

[TaiMc]

I got my cb and front bumper 90% installed. Tank Offroad helped me out with some pictures to make the install on the bumper go easier since there were no instructions. I need to button a couple more things up and I'll be ready to head to Moab on Friday.

Mann I can't wait until I get my dad's CB! Goshhh...I'm trying to be patient!

 

[Boston Mike]

The rubicon bumper installed with no issues and the LED fogs were a simple plug and play because they were a compatible fit to be installed on the rubicon bumper. I went to a dealership and gave them a VIN of a Rubicon 2018 JLU wrangler and they ordered the Mopar Factory LED Fog lamp assembly associated with that VIN. This is why it was a simple plug and play. These are not aftermarket LED fogs.

Keep in mind that the Rubicon bumper and the LED fogs that I ordered are compatible. My sport Halogen Fogs were not compatible with the Rubicon Bumper that I purchased (as there was no aftermarket bracket available for a Base Sport Fogs -> Rubicon Steel Bumper at the time), so this is why I had to purchase the Mopar LED Fog lamps separately through the dealer.

@TTEChris did the install for me. If you have any questions about how easy it was, definitely send him a message! Thanks!

Nice!!!. I just picked up a takeoff set of steel bumpers (front and rear along with the LEDs, skid plate, tow hooks, etc) for $600...............a deal I couldn't pass up. I have the LED fogs in the plastic bumpers, so since he reused the wiring harness for his aftermarket bumper, I should be able to reuse mine for this bumper, I hope. Seriously just ordered a set of Go Rhino bumpers since I gave up on finding a set of takeoffs in my budget space................guess that order will get cancelled now.

 

[TaiMc]

Nice!!!. I just picked up a takeoff set of steel bumpers (front and rear along with the LEDs, skid plate, tow hooks, etc) for $600...............a deal I couldn't pass up. I have the LED fogs in the plastic bumpers, so since he reused the wiring harness for his aftermarket bumper, I should be able to reuse mine for this bumper, I hope. Seriously just ordered a set of Go Rhino bumpers since I gave up on finding a set of takeoffs in my budget space................guess that order will get cancelled now.

Mannn let us know! We wanna see pics!

Also what model Jeep do you have? Sport, SportS, Sahara or Rubicon?

 

[Boston Mike]

I will get better pics in daytime but, mounted my JCR bar. I know it isn't structural but for now I like it. I may try and tie it in later or I may sell it and swap out who knows

Good to see another Boston around here.....................(although I'm in Dallas now).

 

[Boston Mike]

Mannn let us know! We wanna see pics!

Also what model Jeep do you have? Sport, SportS, Sahara or Rubicon?

I've got a JLUR, but the only option it didn't have was the steel bumpers. As my way of turning lemons into lemonade, the outcome of a 5 car wreck I was in 10 days after picking up is steel bumpers for free and free install (thanks to the offender's insurance).

Sponsored