Steel bumper thread size?

[mdelzer]

Does anyone know the thread size of the bolts for the factory steel bumper? I have some new bolts, but figured I'd hit it with a tap before I put the new one in.

Sponsored

 

[melendez69]

Does anyone know the thread size of the bolts for the factory steel bumper? I have some new bolts, but figured I'd hit it with a tap before I put the new one in.

Part # is 06105098AA

https://www.factorychryslerparts.co...Left--Used-for-Right-/4323816/06105098AA.html

 

[mdelzer]

Part # is 06105098AA

https://www.factorychryslerparts.co...Left--Used-for-Right-/4323816/06105098AA.html

I should have clarified the bolts for the bumper end caps. I have them, but don't know the thread size.

 

[melendez69]

I should have clarified the bolts for the bumper end caps. I have them, but don't know the thread size.

The steel bumper diagram is way down bottom. If you're looking for #10 (extension screws), they're M8 x 30. This should point you in the right direction.

https://parts.moparonlineparts.com/...components-front-scat/?part_number=6bu41rxfac

 

[mdelzer]

The steel bumper diagram is way down bottom. If you're looking for #10 (extension screws), they're M8 x 30. This should point you in the right direction.

https://parts.moparonlineparts.com/...components-front-scat/?part_number=6bu41rxfac

That's them, I just don't see where it says they are M8s.

 

[melendez69]

That's them, I just don't see where it says they are M8s.

Check Quadratec & enter the part # into the search... scroll down to the details section & you can confirm there.

Sponsored