Sold: Utah Mopar Tailgate Reinforcement Kit and Relocation Bracket

[mgroeger]

Mopar Tailgate Reinforcement Kit AND Relocation bracket for oversized tires (Plus third brake light relocation bracket).
There are two kits here, one is for reinforcing the tailgate, the other is for shifting the tire up allowing for up to a 37" tire with the factory bumper. Mopar has the nerve to charge over $200 for the relocation kit and over $600 for the reinforcement kit. I'm asking $400 for both kits together or $350 for the reinforcement kit and $125 for the relocation kit. I'll throw in the little Jeep grill brake light relocation bracket and lug nuts for free with the Reiforcement kit or if you buy both. Will ship on your dime, I'm guessing probably around $25 for shipping.
https://www.quadratec.com/p/mopar/oversize-spare-tire-carrier-jeep-wrangler-jl
https://www.quadratec.com/p/mopar/tailgate-reinforcement-kit-jeep-wrangler-jl-82215356ab
https://www.quadratec.com/p/mopar/chmsl-relocation-kit-jeep-wrangler-jl

Sponsored

 

[CarbonSteel]

@mgroeger - out of curiosity, did you replace these with something else? If so, what was it?

 

[mgroeger]

@mgroeger - out of curiosity, did you replace these with something else? If so, what was it?

Nope, got rid of the spare altogether. Multiple reasons... shave weight for when I tow our camper, get the tire out of the way for hitching up when I tow camper, get it out of the way for when I'm crawling around on the rocks.
If I ever go back to a spare I will most likely do a basket.

The bracket worked and worked well for what it was designed to do.

 

[CarbonSteel]

Nope, got rid of the spare altogether. Multiple reasons... shave weight for when I tow our camper, get the tire out of the way for hitching up when I tow camper, get it out of the way for when I'm crawling around on the rocks.
If I ever go back to a spare I will most likely do a basket.

The bracket worked and worked well for what it was designed to do.

Thanks for the information. I have the same setup on mine, but was curious if you had changed to something else. The only issue I have with mine is one of the studs is pulling out of the relocation bracket. I have some 1/4" 316SS plate I am going to use to build replacements with welded in 316SS studs.

 

[mgroeger]

Scrubbed up the gate with a Mr. Clean eraser and Dawn soap based on a question. There is a very mild "scratch" from my whip flag which my bother those with serious OCD...

 

[mgroeger]

SOLD

Sponsored