cosmokenney
Well-Known Member
- First Name
- Cosmo
- Joined
- Apr 30, 2019
- Threads
- 41
- Messages
- 1,007
- Reaction score
- 808
- Location
- Loyalton, CA
- Vehicle(s)
- 2019 JLR (2-door)
- Thread starter
- #1
After going back and forth with their support on how to enable swaybar disconnect in 2H and 4H above 17 MPH, they finally got that working.
But now, the remote start has stopped working. And, I don't think the jeep is accepting my new tire size and/or the diff gear ratio because my shifting is kind of wonky. With 5.13 gears on a 2 door 3.6 and tires that measure 36", I should be seeing 7th and 8th gears. Which I only see now when going down hill. And it likes to stay at 3500 RPM when cruising.
But I am wondering if any setting other than disabling auto start/stop would also disable remote start? My theory is that either they've removed sales codes, or I turned on a setting that otherwise effected remote start.
But now, the remote start has stopped working. And, I don't think the jeep is accepting my new tire size and/or the diff gear ratio because my shifting is kind of wonky. With 5.13 gears on a 2 door 3.6 and tires that measure 36", I should be seeing 7th and 8th gears. Which I only see now when going down hill. And it likes to stay at 3500 RPM when cruising.
But I am wondering if any setting other than disabling auto start/stop would also disable remote start? My theory is that either they've removed sales codes, or I turned on a setting that otherwise effected remote start.
Sponsored
