SimplyJesisJL
New Member
- Thread starter
- #1
I have a 2020jl wrangler that after a little hair brain move have an ESC and start/stop warning.
Not as up to speed as I should be while jeep was idling unplugged connector on vac hose at brake booster, realizing I wasn't going to pull the hose out I plugged the connector back in.
Get in the jeep and have afore mentioned warnings.
I disconnected battery for a short time and reconnected but still have codes.
Have driven several miles with no change to codes.
Any advice on how to clear this issue up?
Not as up to speed as I should be while jeep was idling unplugged connector on vac hose at brake booster, realizing I wasn't going to pull the hose out I plugged the connector back in.
Get in the jeep and have afore mentioned warnings.
I disconnected battery for a short time and reconnected but still have codes.
Have driven several miles with no change to codes.
Any advice on how to clear this issue up?
Sponsored
