wiring connector

I’m installing an aftermarket BSM - Blind Spot Monitoring System in 2-door JL. I’ve installed the LED taillights with the BSM sensors, the SUMA side view mirrors with BSM and turn signals (turn signals are working fine). Now I’m installing the wiring harness. I’ve plugged in all the connectors...

Hi, I am currently installing the Mopar hard conversion wiring kit, after long hours of wiring I tried to start my jeep before the last steering column installation step, I figured that my power steering was not working anymore, then when I undo the PDC pins wiring under hood , it was working...

Jeep Wrangler 2018 JLU 2.0 Turbo So my issue has been that my jeep would overheat when I’m idling or driving constantly at a low speed. My temporary fix was to rev my RPMs 3k + for a few secs and the temperature would go back down. I changed out all 4 spark plugs, slot 1 and 4 Ignition coils...

Hello My rubicon 2.0 liter 2020 jlu came from factory with the led package but the O rings doesnt work - when i chick the wiring on the head lights i see just 3 wires on the adapter and not 4 as it should , i bought from amazon a fuse adapter and awg 20 to wire it up , how can i do it a safe...

Can someone tell me what the two connectors that are still connected go to? These are the wires inside the tailgate when you remove the plastic panel. I have searched the googles but can't seem to figure it out. The black one is the smaller of the two black ones (only 2 wires) and the grey one...

Aloha All, Looking for an assist. I've scoured the internet to find a proper part number for the Mopar Aux Switch instruction book Part H: 10 Way F. Connector. Needless to say I managed to destroy the plug that came with my kit, leaving my switches inop. Need to re-wire the connector and...