Jeep humor waiting room ( ** NO POLITICS ** )

[Smarrtazz]

https://www.etsy.com/listing/568726701/jeep-t-rex-sticker-tyrannosaurus-rex
You can get it in glossy or matte. I did glossy. It’s like a decal stuck to a square plastic piece. So you apply the square to the windshield, make sure it seals to the glass, then pull off the square and the T-Rex should stay.

Like Mike, I purchased two..in Grey

Sponsored

 

[obwahn]

Like Mike, I purchased two..in Grey

I can just see me screwing it up on first try........

 

[Smarrtazz]

I can just see me screwing it up on first try........

Ahahaha!! I was following your lead

 

[obwahn]

Ahahaha!! I was following your lead

Sad ain't it..... hehehe

 

[Smarrtazz]

Sad ain't it..... hehehe

Lead away, fearless one :cwl:

 

[obwahn]

Lead away, fearless one :cwl:

:cwl::cwl::cwl::cwl::cwl::cwl::cwl:

 

[obwahn]

BTW, got a call from my sister that she was nearby so she stopped by and we all enjoyed lunch together. Sammiches all around! Stayed about an hour and then headed home. She is about 2 hours from us in southern VT.

 

[Lurvis33]

I can just see me screwing it up on first try........

It’s a pretty tight squeeze. Felt like I needed microscope and tweezers to work with it :cwl: What I did was pull the paper from the sticky side to about half way, cut the paper in half, re applied it to the sticky side, then applied painters tape to a half of the other side (not paper). I used the painters tape as a guide/holder to align it just right then I took off the paper from the half not covered by painters tape and applied that half of the decal. Now that it was set, removed the painters tape and while pushing on the set side, I removed the other half of the paper and applied the rest of it. Then I made sure the decal was fully applied and removed the final plastic square piece.

I hope that makes sense...

 

[obwahn]

It’s a pretty tight squeeze. Felt like I needed microscope and tweezers to work with it :cwl: What I did was pull the paper from the sticky side to about half way, cut the paper in half, re applied it to the sticky side, then applied painters tape to a half of the other side (not paper). I used the painters tape as a guide/holder to align it just right then I took off the paper from the half not covered by painters tape and applied that half of the decal. Now that it was set, removed the painters tape and while pushing on the set side, I removed the other half of the paper and applied the rest of it. Then I made sure the decal was fully applied and removed the final plastic square piece.

I hope that makes sense...

My problem in lots of these situations is having the correct glasses on. I can see distance without, but I need two different glasses depending on arm length or close up reading. PITA!

 

[Lurvis33]

My problem in lots of these situations is having the correct glasses on. I can see distance without, but I need two different glasses depending on arm length or close up reading. PITA!

:cwl::cwl::cwl: My dad’s the same way! I give him a hard time now but I have a feeling my time will come

 

[LydiaSP613]

 

[obwahn]

OMG OMG OMG! There's Vida!!!!!!!!!!!

 

[obwahn]

She is just sooooooooo pretty! Nice pose too!

 

[LydiaSP613]

 

[Lurvis33]

Sponsored