DRL Question

[jaysmooth24]

Maybe I’m going crazy but I’m 10000% sure that my DRL were white and now they are yellow. Any ideas of a setting I may have changed inadvertently? Only thing I’ve done is mess with jscan to fix the Oracle flush lights.

Sponsored

 

[Rhinebeck01]

Well, if you want your JL to not look like all the other JL's you may want to keep it as is... Your JL will be unique.

I get lots of comments regarding my JL having yellow versus white..

---------------------------

With JSCAN you change to yellow for DRL's by doing this:

Turn Signals for DRL's

Maybe need:
ADAPTATION ---> DRL--> Day time running lights Configuration- Canada DRL

ADAPTATION ---> DRL - Day time running lights - settings --> DRL Lamp Location --> Turn Signal DRL

 

[Rhinebeck01]

A couple of weeks ago, I too goofed in regard to a JSCAN setting..... My 2 dr. JL ended up like this after a setting change with JSCAN..

 

[Rhinebeck01]

SO, I reached out to a JSCAN rep, I deal with in Warsaw, Poland.... and he had me try another setting... chitt, then I ended up with this...

 

[dshark1]

Any pics of the daytime running lights in yellow? Would really like to see how that looks!

 

[Rhinebeck01]

@jaysmooth24

Here is one you might like for your JL:

Fogs with High Beams:

ADAPTATION ---> Vehicle user settings --> Front Fog Lamp Dropout Enable On/Off --> Target Value = Deactivated

 

[Rhinebeck01]

Any pics of the daytime running lights in yellow? Would really like to see how that looks!

@dshark1

No, no pictures.. but, can tell you it is pleasing and really has your JL standing out amongst other JL's on the road... I get lots of favorable comments regarding the yellow for DRL's.

It is real easy to try and go back if you do not like, etc..

 

[Rhinebeck01]

@jaysmooth24

And, if Weather Alerts are driving you crazy, this one is a good one.... do know it does stop any and all Travel Link stuff.... like gas prices, etc..

Disable Weather Alerts:

ADAPTATION ---> Radio user settings --> SDAR Travel Link Feature Present On/Off--> Target Value = Deactivated

 

[jaysmooth24]

Any pics of the daytime running lights in yellow? Would really like to see how that looks!

I’ll see if I remember tomorrow and will take one.

 

[Rhinebeck01]

I’ll see if I remember tomorrow and will take one.

@jaysmooth24

Did you get your flush mount Oracle's squared away aok with JSCAN. IF not, I can give you the how to in regard to that. I just did that deed with JSCAN, a few days ago.

 

[jaysmooth24]

@jaysmooth24

Did you get your flush mount Oracle's squared away aok with JSCAN. IF not, I can give you the how to in regard to that. I just did that deed with JSCAN, a few days ago.

If you can, I’d appreciate it. I got it to work with the euro lights turn signal trick posted on the JT forum however, randomly at times when I would come to a stop light, I would get turn signals out and every time I came to a stop it would give me the warning on my dash.

 

[Rhinebeck01]

@jaysmooth24

I did the following 2 weeks ago .... about 550 mi. ago and have had no issues... no codes, no hyperflashing, etc..

My 2018 JL has LED option and fortunately, no BSM.

With JSCAN.... I first, disabled diagnostics for both left and right turn lamps and then I did the install of the Oracle Flush Mounts. That was it..

The dance with JSCAN took about 6 min. to do.. Easy easy... How to do the deed with JSCAN, read here. https://www.jeepgladiatorforum.com/forum/threads/flush-mount-tail-lights.30902/page-81#post-837055

IF, you did install and got error codes, issues....do as mentioned above and then use JSCAN to clear old error codes..

 

[jaysmooth24]

@jaysmooth24

I did the following 2 weeks ago .... about 550 mi. ago and have had no issues... no codes, no hyperflashing, etc..

My 2018 JL has LED option and fortunately, no BSM.

With JSCAN.... I first, disabled diagnostics for both left and right turn lamps and then I did the install of the Oracle Flush Mounts. That was it..

The dance with JSCAN took about 6 min. to do.. Easy easy... How to do the deed with JSCAN, read here. https://www.jeepgladiatorforum.com/forum/threads/flush-mount-tail-lights.30902/page-81#post-837055

IF, you did install and got error codes, issues....do as mentioned above and then use JSCAN to clear old error codes..

That’s the same process I followed except disabling the diagnostic before install. Maybe I need to pull them off, run that option, install and run the jt forum suggestion to see.

 

[Rhinebeck01]

That’s the same process I followed except disabling the diagnostic before install. Maybe I need to pull them off, run that option, install and run the jt forum suggestion to see.

@jaysmooth24

Was my bright idea to do the JSCAN dance before the Oracle install. Just made sense to me.. No one else had mentioned doing that but I thought geeez, that would prevent any issues with the newly installed Oracles.

IF you installed, then got errors/hyperflashing and then did the JSCAN dance, did you remember to clear codes afterwards. This is necessary so I have read in posts by other's.

You might try clearing codes and then see what the result is.

 

[jaysmooth24]

@jaysmooth24

Was my bright idea to do the JSCAN dance before the Oracle install. Just made sense to me.. No one else had mentioned doing that but I thought geeez, that would prevent any issues with the newly installed Oracles.

IF you installed, then got errors/hyperflashing and then did the JSCAN dance, did you remember to clear codes afterwards. This is necessary so I have seen by posts from other's.

You might try clearing codes and then see what the result is.

I did not clear the codes after doing the setting change, maybe that is the culprit. Will give that a try tomorrow and report back.

Sponsored