What's in our shop...

[RebelOffRoad]

The purpose of this thread is to showcase the smaller projects we have coming through the shop on a daily basis. If you see something and have a question, please feel free to ask! I'm unable to keep up with and photograph step by step what all of our techs are doing throughout the day but, I will do my best to present this info in a progressive sequence.

Again, if you have any questions on product or process, please feel free to ask.

Cheers!
-Kyle @RebelOffRoad
_______



This customer brought their Tundra in to replace the factory Bilstein's with a set of new Icon Reservoir Shocks.

With the compressor and locker installed previously, we added the manifold kit on this JKU.

A JKU in for upgraded axle shafts and a regear.

Sponsored

 

[RebelOffRoad]

JKU in for a Teraflex Alpine Long Arm system

 

[RebelOffRoad]

Rock Hard Bolt-On Cage

This is part of a larger build we have in progress, but here are some shots of the roll cage components going in.

 

[RebelOffRoad]

New Shocks, Springs and Bumpstops

Replacing a rear pinion seal

Installing a rock/accent lighting system..among other things including a new vehicle wrap and wheel/tire combo.

 

[RebelOffRoad]

2018 JL in for a lift, wheels, tires and here are the RockSlide engineer sliders

JK in for a tune-up, some extra BORLA components and a bunch of other goodies

JK in for new axle seals and other "consumables" replacement parts.

F150 in for a lift, exhaust and new tires

LJ in for long arm kit and coil overs

JK in for new coil overs, window delete kit, roll cage, and more

TJ in for complete custom drive train and suspension set up

 

[RebelOffRoad]

New Fox Shocks and ALCON's Big Brake Kit for Ford Raptor and F150

 

[RebelOffRoad]

2017 JKU Recon Build Progress:
Borla Climber Exhaust

Currie AntiRock Rear Swaybar and our RECON rear coilover kit

Our RECON front coilover kit w/ king bumpstops

A bunch of other goodies! KC hilites Pro Grav 6 light bar, poison spyder inner fenders (to be installed still) and more...

2004 TJ BUILD PROGRESS:
putting the finishing beads on the front coilover towers

mock up to find tower placement

rear towers, bumpstop sleeves and swaybar brackets intalled

checking control arm bracket alignment

2006 LJ Build Progress:
Axle housings scrubbed of old brackets, rear tower tacked into place...alignment check

front spring hangars cut off and smoothed over

a before shot

 

[RebelOffRoad]

Checking the torsional movement on the new TJ suspension set up

 

[RebelOffRoad]

2012 JKUR in for replacement ALCON rotors.

Hole reinforcement work on 1/8" frame - - 3/16" plate drilled and welded around the hole to prevent frame pinch

F350 brought in for "death wobble" inspection

4Runner in for new shocks--ICON Stage 4's

LJ BUILD:
coil and shocks off and on the floor

coilovers, control arm brackets and heim joints prepped for install

TJ stretch and build
torsion swaybar bracket and coilover towers welded into place and coated

 

[Grateful1]

The purpose of this thread is to showcase the smaller projects we have coming through the shop on a daily basis. If you see something and have a question, please feel free to ask! I'm unable to keep up with and photograph step by step what all of our techs are doing throughout the day but, I will do my best to present this info in a progressive sequence.

Again, if you have any questions on product or process, please feel free to ask.

Cheers!
-Kyle @RebelOffRoad
_______



This customer brought their Tundra in to replace the factory Bilstein's with a set of new Icon Reservoir Shocks.

Browsing through the first set of photos, the hand picture is so AUsome. It reminded me of the hand from The Adams Family.

Sponsored