What mod are you MOST proud of?! Pics welcome!!

[Married2MyJeep]

I too have a list as long as your arm but the two I’m most proud of are my Prodigy Performance Stage 2 Turbo and my Tricolor Katzkin leather interior. One little device I didn’t see mentioned is a Draggy which measures 0-60, 1/4 mi and other distances to an accuracy of 0.01 seconds.

Wow, haven't seen/heard of one of those turbos installed! How does that compare to my 2.0 haha and I would love to see that interior. It sounds pretty savage!!

Sponsored

 

[Married2MyJeep]

I have a long list as well. Currently, I like the DV8 HDJL-01 aluminum half doors I put on last week. I have yet to see another jeep with these. The wavy flag J-top is nice as well and looks good behind my tow vehicle.

Wow dude, when you started talking about new DV8 doors I was pretty sure you were talking about the powdercoat and mesh ones for $999 they just released, but then I saw yours and had to pick my jaw up off the floor! My goodnessss those are sexy! And the bumper too?! Let me just say I'm a big fan of @DV8Offroad and kind of wish I had discovered them sooner. I have their rear bumper and tail light guards and wouldn't mind having much more... Especially those doors, they hit it out of the park on that!!! Anyway, great work brother. She looks absolutely amazing!

 

[DravenGSX]

My favorite mod so far has been the red raptor lined floor. It was so worth the effort. Really nice to be able to spray down the interior, and not worry about carpet anymore.

My Jeep is a 2018 JLUR, black and red pirate themed.

RK 3.5” Springs
RK Front LCAs
RK adjustable track bars
Teraflex Falcon 2.1 shocks
Metalcloak bump stops
Red Raptor Lined interior
20x10 Insane Off-road IO-07 (red milled)
37x13.50R20 Milestar Patagonias
Cherry red @AlienSunshade 2 piece shade
Cavfab 4x4 spare tire delete
Cooltech Inc JL CB antenna mount w/ red Firestick
Cobra WX75 CB Radio
Mic Tuning RGB rock lights
Anytime Wave red light up wave
Pirate Rated badge
Custom paracord grab handles
CMM Mirrors
US Speedo red face gauges
Smittybilt XRC2 10k winch (in the garage waiting for winch plate)

Coming soon:
Cavfab 4x4 spare tire carrier, and rear bumper
Audio upgrades

 

[Married2MyJeep]

my baby

Yesss another black one. Looks great brother! Those doors look familiar too

 

[Married2MyJeep]

I looked at that bracket that is one (well two) EXPENSIVE bracket(s) I considered a dual set up but having a 30" hood hing bar and a 17" bar on the bumper I could not see the need for dual pilar/cowl mount lights and after installing the singles on each side it is more than enough light, In fact so much glare yo cannot even look at them from 50' (collectively).

Yeah they are definitely a little more than a lot out there, but I really like the look and how inconspicuous they are in comparison. I also like that you can still fold down the window though, admittedly, I probably won't be doing that too often. Sounds like you have some really good lights going on yours though, I need to step up my game! Btw I ordered the RSE skins you recommended today

 

[lightsout]

Yeah they are definitely a little more than a lot out there, but I really like the look and how inconspicuous they are in comparison. I also like that you can still fold down the window though, admittedly, I probably won't be doing that too often. Sounds like you have some really good lights going on yours though, I need to step up my game! Btw I ordered the RSE skins you recommended today

the only advice for installing the RSE skins the holes are exact had to do over again you would drill the oles out just a bit to allow for adjustment, I had to fight a couple of the screws getting them in. The hole in the skis have about 1/16" play with the screw so no room for error on whole locations. I would drill them out and so you have a 1/4" play (they are aluminum so no need to repaint). the washers will cover any gaps. Also the washers they provide the whole is larger than the screw do they tend to not sit centered, I wold buy new washers that fit the screw better.

So I set two of the rivet nuts on each side then attached the shins then used a punch to set the center of each whole for drill points, then removed the rivet nuts then drilled the wholes.

This is important while most exterior metal on the wrangler is Aluminum the mounting area for these is steel, make sure you use a self etching primer on those holes. Ten when I set the rivets I used red locktite as a sealer. Again the only challenge is the alignment.

One more thing all the drill points except two you will drill through only the outer metal however two of the rivets forward of the driver door there is a second piece of metal about 3/4 inside that you will also have to drill. Just make you you set your drill points with a punch so your drill does not walk.

 

[Unix_Gawd]

Wow dude, when you started talking about new DV8 doors I was pretty sure you were talking about the powdercoat and mesh ones for $999 they just released, but then I saw yours and had to pick my jaw up off the floor! My goodnessss those are sexy! And the bumper too?! Let me just say I'm a big fan of @DV8Offroad and kind of wish I had discovered them sooner. I have their rear bumper and tail light guards and wouldn't mind having much more... Especially those doors, they hit it out of the park on that!!! Anyway, great work brother. She looks absolutely amazing!

Thx! I have the

Wow dude, when you started talking about new DV8 doors I was pretty sure you were talking about the powdercoat and mesh ones for $999 they just released, but then I saw yours and had to pick my jaw up off the floor! My goodnessss those are sexy! And the bumper too?! Let me just say I'm a big fan of @DV8Offroad and kind of wish I had discovered them sooner. I have their rear bumper and tail light guards and wouldn't mind having much more... Especially those doors, they hit it out of the park on that!!! Anyway, great work brother. She looks absolutely amazing!

Thx! I have the DV8 RBJL-02 tire carrier. It was an adventure to install since they don't have instructions. I also removed the 3rd brake light because it was too high.

 

[RubenZ]

My Rhino Rack Pioneer Platform with @Maximus-3 Brackets. http://www.myjlproject.com/blog/rhino-rack-roof-rack-w-maximus-3-brackets/

This allows me to do all the overland activities I plan. Installed a Batwing Awning, Can put a Roof Top Tent, cary stuffy like fence boards etc back from Home Depot etc. etc.

 

[RMojitoJL]

Fav mod prob based on looks are the Mopar beadlocks color matched to the Mojito Paint.
Rides great on the 2" Mopar lift (Almost 3.5" real world) and the Fox shocks.
The Road OffRoad steps with the color matched roam logo add a little aggressiveness to the side look, and the wife loves them.

More coming! It never ends-

 

[brazos]

Not overly proud, but it’s the only one I came up with myself, and it allows me to sleep comfortably in the Jeep.

 

[Married2MyJeep]

Hard to pick the most favorite mod but it would have to be a tie between the lift and the bumpers / winch.

Looks great brother, you seem to have done a good job prioritizing your mods as well! I can see why you favor that bumper/winch combo too. Looks awesome together!

 

[Married2MyJeep]

Backseat clothes hanger hook...It’s the cheapest and most simple but I’m still pretty proud of it bc it is probably the only “mod” I didn’t ripoff anybody else ha. And, it is functionally used as much as anything (along with my design 67 front dash phone mount). I wear suits to work (JL is my daily driver).... Having a hook to hang my suit jacket on is worth the $8 I spent on it. Plus, my placement of the strap in the grove of the sound bar was brilliant (if I can say so myself) ha

That's cool man, definitely adds a personal touch! And I agree it's definitely a plus when you introduce an original mod, and it gives you that much more reason to be proud of it! I did a DIY custom paint job on both my fuel door and phone mount/tray, and I still admire them every chance I get! Haha nice work

 

[Married2MyJeep]

Favorite mod so far? Rear bumper and rock rails from Motor City Aftermarket!

Looks

Favorite mod so far? Rear bumper and rock rails from Motor City Aftermarket!

Looks great on it brother! Love the clean look of that rear bumper especially, I can see why you like it!

 

[TylerR]

Without a doubt the metalcloak. However, My VKS Informant sliders shipped out and just plan to matte clear coat to keep the bare steel look. Welds are too nice to cover up. That might take the #1 spot once they're on.

 

[Married2MyJeep]

My favorite mod so far has been the red raptor lined floor. It was so worth the effort. Really nice to be able to spray down the interior, and not worry about carpet anymore.

My Jeep is a 2018 JLUR, black and red pirate themed.

RK 3.5” Springs
RK Front LCAs
RK adjustable track bars
Teraflex Falcon 2.1 shocks
Metalcloak bump stops
Red Raptor Lined interior
20x10 Insane Off-road IO-07 (red milled)
37x13.50R20 Milestar Patagonias
Cherry red @AlienSunshade 2 piece shade
Cavfab 4x4 spare tire delete
Cooltech Inc JL CB antenna mount w/ red Firestick
Cobra WX75 CB Radio
Mic Tuning RGB rock lights
Anytime Wave red light up wave
Pirate Rated badge
Custom paracord grab handles
CMM Mirrors
US Speedo red face gauges
Smittybilt XRC2 10k winch (in the garage waiting for winch plate)

Coming soon:
Cavfab 4x4 spare tire carrier, and rear bumper
Audio upgrades

Wow, those wheels truly are "insane" haha I think they are perfect for your application! Never see that raptor lined floor before, looks really cool esp. with all of your red accents! How do you like those Milestar Patagonia's? Lately I've been hearing more and more about them... Definitely need to check back once you add that tire carrier and bumper, I'd love to see them!

Sponsored