Sponsored

What do you use your 4 Aux buttons for???

runningonemptyy

Well-Known Member
First Name
roland
Joined
Aug 20, 2021
Threads
6
Messages
89
Reaction score
87
Location
florida
Vehicle(s)
2021 wrangler
1 - front pods
2 - raptor lights
3 - rear pods
4 - currently open
 

Grayhound

Well-Known Member
First Name
Dan
Joined
Jul 30, 2022
Threads
27
Messages
438
Reaction score
668
Location
Michigan
Vehicle(s)
Jlurd
1) ditch light
2) air compressor
3) aux high beam lights
4) winch cut off
 

Adv_aw8s

Well-Known Member
First Name
Rob
Joined
May 30, 2021
Threads
3
Messages
310
Reaction score
477
Location
Colorado
Vehicle(s)
2021 Rubicon diesel
Clubs
 
#3 Rear chase light
#4 bumper reverse/camp light.

I'll use the others for some lp4's or lp6's for the front bumper.

Jeep Wrangler JL What do you use your 4 Aux buttons for??? PXL_20230304_012253818
Jeep Wrangler JL What do you use your 4 Aux buttons for??? PXL_20230304_012224099
Jeep Wrangler JL What do you use your 4 Aux buttons for??? PXL_20230304_012132706
 

Covet

Well-Known Member
Joined
Jul 20, 2018
Threads
2
Messages
392
Reaction score
520
Location
Los Alamos, NM
Vehicle(s)
18 JLUR, 22 392, 22 4xe JLUR sold x3, 24 392
On my previous Wrangler, spots, floods, winch, and 1 tied to nothing. Current Wrangler, have not added things that need switches yet. Would probably do the lights and winch again.
 

Sponsored

zouch

Well-Known Member
Joined
Sep 17, 2020
Threads
29
Messages
2,074
Reaction score
1,972
Location
Berkeley, CA
Vehicle(s)
XJ, JLUWD
2- snow lights (big yellow H3 Halogens on the front bumper.)
3- ditch lights (LEDs on A-pillar mounts.)
4- front E-locker
 

JL MADDOG

Well-Known Member
First Name
Michael
Joined
Feb 8, 2021
Threads
33
Messages
930
Reaction score
1,482
Location
Apache Junction, AZ
Vehicle(s)
2021 JL 2.0L Turbo
Occupation
Jeepin'
1 - Front hitch bumper light bar
2 - Roof rack front light bar
3 - Roof rack rear light bar
4 - (saved for ditch light install)
 

Spank

Well-Known Member
Joined
Mar 29, 2017
Threads
25
Messages
2,400
Reaction score
4,022
Location
Colorado
Vehicle(s)
2018 Jeep Wrangler Unlimited Rubicon, 2020 Dodge Challenger RT Scat Pack
I use mine for auxiliary lights, but I also took advantage of the added hot/ignition-only interior wires you get with the switch bank, so I've got my dashcam, CB, and GMRS radios all wired to those.
 

Opus

Well-Known Member
Joined
Jul 17, 2022
Threads
80
Messages
3,150
Reaction score
7,137
Location
Midwest US
Website
www.jlwranglerforums.com
Vehicle(s)
2023 Sport S, 2021 Compass
Build Thread
Link
I've got a set of lights and A-pillar brackets coming soon so that will be my first time wiring to the AUX switches. I'm trying to decide whether I want to wire them both to switch #4 or wire one light to #3 and the other to #4...
 

Headbarcode

Well-Known Member
First Name
Mike
Joined
Aug 16, 2018
Threads
26
Messages
7,782
Reaction score
17,829
Location
LI, New York
Vehicle(s)
2019 JLUR Stingray 2.0 turbo
Vehicle Showcase
1
I'm currently only using one of the lower Amp switches for a winch power interrupt solenoid. I'm contemplating hooking up my gmrs radio to one and the charger for 2 handhelds on another. The last one will eventually be for a cooler.

Forward lighting, aux reverse lights, and rock lights are all on a seperate switch panel on the drivers grab rail. It makes lighting easier to control on the fly, having those buttons up closer to the steering wheel and my line of sight on the roads/trails.
 

Sponsored

whenasked

Well-Known Member
Joined
May 29, 2021
Threads
9
Messages
71
Reaction score
56
Location
Cincinnati
Vehicle(s)
2021 Jeep Wrangler Rubicon Unlimited 4XE
My aux switches turn off by themselves sometimes. Have checked all settings to prevent it. Is this a possible defect?
 

Omen

Well-Known Member
First Name
Mike
Joined
Apr 28, 2022
Threads
1
Messages
169
Reaction score
279
Location
Wisconsin
Vehicle(s)
2022 JL Willys 2.0
Build Thread
Link
Occupation
IT Manager
I crimped/soldered on 2 circuit weatherpacks to each underhood connection. The extra circuit on each is a matched wire gauge ground to the appropriate lugs. I also made blank connectors to cap off the unused circuits to keep them sealed. This allows any accessory to be quickly added (or just tested) with a nice modular interconnect.

1 - 6 way LED lights (latched on ignition)
2 - N.C.
3 - control for the 6 options of the lights on 1 (momentary on ignition)
4 - N.C.

I'm not sure where the rest will end up, and I also added a modified Lasfit Rubi style locker/aux switch system. The modification was to remove the branch that fed into the interior. What is in the cabin from the factory is enough for me.

Omen
 

Jeepiner

Banned
Banned
Banned
First Name
Jeepineer
Joined
Apr 1, 2022
Threads
0
Messages
177
Reaction score
353
Location
Toledo, OH
Vehicle(s)
2022 JLURD
Occupation
Mechanical Engineer
 



Top