What did you do TO your Jeep JL today?

[X99104]

Installed Warn bumper

and rewired deadman for winch over the past week

 

[Varilux]

Nice jeep, tell me about the Mustang. Please ! Pics maybe

Thank you! Don't want to take up space on a Jeep forum with a bunch of Mustang pics, but here's one pic:

I've loved Mustangs since I was a kid, and bought this '65 from the original owner in Ft. Worth back in 2011. It had been parked under a carport since 1987, and was totally unrestored. My son and I stripped it down, and I did everything except the paint myself. The most unique thing about it is I kept the original straight six (200ci) and put a 3x1 Offy carb setup on it. Combined with the 5 speed manual I put in, it gets down the road pretty well (my dad and I drove it from Dallas to Charlotte for the 50th anniversary celebration a few years ago). It currently shares the garage with the Jeep, and I'm usually tinkering on one or the other (after all, Jeep might be the only vehicle with more of an aftermarket than the Mustang :^).

I haven't updated it in a while, but my build thread can be found at https://just-a-six.tumblr.com/ There's all kinds of pics there. Between the Jeep and the Mustang, the family has a lot of fun with our vehicles!

 

[quietpeen]

Finished installing the 2.5” spacer lift

 

[GuapoJeeper]

Thank you! Don't want to take up space on a Jeep forum with a bunch of Mustang pics, but here's one pic:

I've loved Mustangs since I was a kid, and bought this '65 from the original owner in Ft. Worth back in 2011. It had been parked under a carport since 1987, and was totally unrestored. My son and I stripped it down, and I did everything except the paint myself. The most unique thing about it is I kept the original straight six (200ci) and put a 3x1 Offy carb setup on it. Combined with the 5 speed manual I put in, it gets down the road pretty well (my dad and I drove it from Dallas to Charlotte for the 50th anniversary celebration a few years ago). It currently shares the garage with the Jeep, and I'm usually tinkering on one or the other (after all, Jeep might be the only vehicle with more of an aftermarket than the Mustang :^).

I haven't updated it in a while, but my build thread can be found at https://just-a-six.tumblr.com/ There's all kinds of pics there. Between the Jeep and the Mustang, the family has a lot of fun with our vehicles!

WE ARE!

 

[Sunshne×Whsky]

Got my winch installed too! Not a big fan of the wires hard up against the grill. This will probably be the last addition to the Jeep for a while. I told my wife no more jeep parts, my other rig needs some attention!

 

[AstroDave]

Installed Redline Racing hood struts and about to install WeatherTech front mudflaps...

 

[Kenny]

Took my daughter and her JK to 10,000’

 

[JJSix]

Installed the Artec spare tire delete plate, the LED lights for it, and the new bumper. Loving the look!

 

[TrailTorque]

Installed the Artec spare tire delete plate, the LED lights for it, and the new bumper. Loving the look!

Had a flat about a week ago on the interstate. So glad I had a spare! Something to think about!!

 

[JJSix]

Had a flat about a week ago on the interstate. So glad I had a spare! Something to think about!!

Yeah, its a bit of a concern, but I have a compressor and patch kit for the interstate and throw it in the back when taking it off-road. It'll probably bite me in the butt one of these days but hasn't yet!

 

[TrailTorque]

Yeah, its a bit of a concern, but I have a compressor and patch kit for the interstate and throw it in the back when taking it off-road. It'll probably bite me in the butt one of these days but hasn't yet!

You’ll should be fine with that. Unfortunately mine was not repairable, terrible luck. If I hadn’t had the spare it would have been towed. If you’re staying local it shouldn’t be an issue.

 

[ColoJLRubi]

This weekends project courtesy of AAL

 

[EDH_JL]

Washed it and test fit the Rugged Ridge tube doors. Not sure if I will put on the mirrors as I like the look without it (I have a mirror mount on the grab handle)

 

[Bricazo]

Installed diode dynamic clear side markers. You don’t need to remove half the stuff they tell u to.. only removed one t30 and a 10mm bolt. Looks very clean now

 

[JMONEZ]

Installed the Steer Smarts front track bar and sway bar links

What lift are you running? I assume you notice some nice improvements? Did you have wobble or steering problems before?