What did you do TO your Jeep JL today?

[Hobo]

Nice Jeep. Watch your doors for water leaks. There was a forum thread by someone who wrote he put those door sills on and that lip that goes over edge made his door rubber seal leak some. He said didn't seal well with that lip over the edge. Just FYI.

Thank you! Hmmm. So there is definitely water on the top of the door sill protector when it rains, is that what you mean? Or do you mean water actually getting in over the lip and into the Jeep cabin?

 

[NewJLU2019]

Mounted the 275/70/18 KO2s yesterday. All five are set. Ran them at 36PSI yesterday, and dropped them to 34 today. Softened the ride up some and tracks nicely.

Nice Jeep !! I too installed the 275/70/R18 BFG KO2's 33's 4 Wheel Parts installed small Lift and tires. BFG Tech recommended 40 PSI and that's what they did. I drove few days and little firmer ride. I read some forums since I am New Jeep Owner and they said air down to 35 PSI I felt difference right away. The weather turned little cold here and PSI dropped to 33 last week. I like the ride much better now too.

 

[NewJLU2019]

Thank you! Hmmm. So there is definitely water on the top of the door sill protector when it rains, is that what you mean? Or do you mean water actually getting in over the lip and into the Jeep cabin?

I can try to find his thread. He said it did come in from under the bottom door seal where the RR door sill had that lip over. Someone added that the new RR sills corrected that. Not sure when he bought his. Just might keep eye on that area during heavy rain and driving.

 

[NewJLU2019]

Thank you! Hmmm. So there is definitely water on the top of the door sill protector when it rains, is that what you mean? Or do you mean water actually getting in over the lip and into the Jeep cabin?

I am sorry for the earlier comment. It was the Quadratech Door sills. My Bad. Didn't find thread from person with water inside but this below made comment about water. I would just keep eye on sill. If you can't see light coming in you are good. I went with the Mopar Door sills after I had read that thread. No lip on those.

Spearmin said: ↑
Installed the Quadratech door entry guards yesterday. The have been on back order since June and I was eager to get them on to add some protection for the otherwise fully exposed door sills that are just waiting to be scratched up. Got them on and they look awesome. Then, I was sitting inside and noticed a speck of light coming into the cabin, precisely from where the guards have been installed. No wonder people were complaining about water getting into the cabin after driving in the rain. So these things have got to come off and go back to Quadratech asap. Can anyone tell me if it is safe to just pull them off. Will this approach take the paint with it. I know they are using 3M adhesive tape, which is some pretty strong stuff. Why would Quadratech continue to produce and sell something that is obviously flawed. Seriously pissed about this.

 

[captnjbk]

Nice Jeep !! Did you get your Sting Gray Badge from ThirtyOne ? I haven't put mine on yet. Where did you find the Sting Gray Decal ?

Yes badges are from ThirtyOne. I added some red to make it go with the Jeep trail rated badge. Sting Gray Edition decals are from Pixel. Everything came out great. Looks good.
Btw...........thank you ThirtyOne and Don at Pixel.

 

[NewJLU2019]

Yes badges are from ThirtyOne. I added some red to make it go with the Jeep trail rated badge. Sting Gray Edition decals are from Pixel. Everything came out great. Looks good.
Btw...........thank you ThirtyOne and Don at Pixel.

How hard is it to get Decal on straight ? I have been looking at decals but not sure how easy it is to do straight and remove bubbles if any.

 

[Cody6597]

Do I need to go to 38’s or 40’s? Running 37 12.50 17 Mastercraft MXT’s now.

Installed MC 3.5 Game Changer, Adams front DS, American Adventure Labs LED’s and Pixie Decals vent decals.

 

[sheram]

Just did this!!! Carefully change your wiper blades. Apparently the spring is very strong.

Just DAMN

 

[NewJLU2019]

Just DAMN

DAMN DAMN !!!

 

[Kripas]

Just back from my detailer....
XPEL protection and ceramic coating along with window tint and replaced all vehicle emblems with blackout ones.

Why you didn’t put the Factory mojito side panels on your satin black grill . That will be look good

 

[Jeepdude101]

Man that stinks I was changing the wipers on a ram 2500 a couple weeks ago and that wiper frame fell no cracks guess ram windshield are a bit stronger I have had rocks flying from other vehicles on the highway crack 2 windshields on my jlur in less than 10,000 miles

 

[Buzz11]

Installed Westin rear bumper and tire carrier. Love that swing arm is attached to tailgate so I only have to open 1 thing.

Next step, figure out how to mount my ski rack to it.

... and for Christmas ask for lights to go in the square holes.

Buzz

 

[captnjbk]

How hard is it to get Decal on straight ? I have been looking at decals but not sure how easy it is to do straight and remove bubbles if any.

The small ones are super simple. Take your time and use some tape to get it all lined up before you peel off the backing.
Larger ones use the wet method.

 

[geem03]

Do I need to go to 38’s or 40’s? Running 37 12.50 17 Mastercraft MXT’s now.

Installed MC 3.5 Game Changer, Adams front DS, American Adventure Labs LED’s and Pixie Decals vent decals.

I think that looks awesome!!

 

[offset_98]

Bought some Rubicon take offs and ordered some 295/70/17 geolandar m/t g003 tires for it. Pics next weekend!!