What did you do TO your Jeep JL today?

[UKCATS]

Took off the visor warning labels.

@szobell

I also removed mine with good results...

No way you would get them off without the application of heat.

Here is a thread talking removal of them:
https://www.jlwranglerforums.com/forum/threads/sun-visor-warning-decal-removal-mod.4873/

Here are another pic I found on the forum that truly representatives of the end result on the visor.

Yes, you will see a faint outline of the decal and that outline cannot be removed with chemicals.

Fortunately, the outline is slight and after awhile you won't even notice it.

I used a blow dryer (not a heat gun), finger nails, and LOTS OF PATIENCE (go slowly).

I’ll bet y’all take the tags off your mattresses too. #rebels #living dangerously.

 

[californiajeeping]

@californiajeeping

Costs approx $62.00+-

Thanks! I wonder what other 2019 JL parts people have used on their 2018 JLs.

 

[Rhinebeck01]

@californiajeeping
From what my local parts guy has told me the door swings both ways so to speak..
There are 2018 JL parts that are lets say.. more stout, tend to break less, etc. then a 2019 part.

 

[Boatbuilder88]

Took off the visor warning labels.

Looks good!! Did you use any heat, or just a ton of patience?

I used a hair dryer and a lot of patience. The visor vinyl will stretch so work slowly. It took about 30 minutes per sticker.

There is a faint shadow but no sticky residue. I'm very happy with the results.

 

[IdahoSurveyor]

Finished installing my Tactical Recovery Equipment safety thimble, safety thimble fairlead and fairlead license plate bracket.

 

[IPvFletch]

Shop installled metalcloak control arm set and rear track bar.

Is that rear trackbar installed upside down? It has the bends in it to avoid the exhaust and the pumpkin. But it looks like they are flipped, where they will hit both of those more easily. If you flip it, it would hit those less easily. I dunno, maybe it just looks that way from the pic.

 

[lochado]

New wheels (KMC XD133s 17x9), tires (Nitto Ridge Grappler 35x12.50x17 -12) and orange chrome valve caps. Still need to get the Jeep lettering back on

where did you get the front bumper bar? seems like it is on your stock bJL number..

 

[Fire Burns]

@lochado

where did you get the front bumper bar? seems like it is on your stock bJL number..

https://maximus-3.com/home/maximus-3-jl-stinger-bar

 

[RubenZ]

Is that rear trackbar installed upside down? It has the bends in it to avoid the exhaust and the pumpkin. But it looks like they are flipped, where they will hit both of those more easily. If you flip it, it would hit those less easily. I dunno, maybe it just looks that way from the pic.

Ya, that thing is on upside down.

 

[Goin2drt]

Added some tow hooks. Wow I really tried supporting some vendors on here but holy hell their shipping was a crime. Amazon took care of business.

 

[robaw]

Added side vent blackouts from @pixeldecals then drove around in the snow for a little bit.

 

[nymarty]

New Rubi slippers. Big thanks to fellow member @Alanscott1 . 33s are perfect on stock Sport!

Now I just have to get rid of those euro fender inserts.

 

[Mkz567]

Is that rear trackbar installed upside down? It has the bends in it to avoid the exhaust and the pumpkin. But it looks like they are flipped, where they will hit both of those more easily. If you flip it, it would hit those less easily. I dunno, maybe it just looks that way from the pic.

I think you are right from other pics. Does it matter? I'm lazy at the moment to go back to the shop..

 

[UKCATS]

Is that rear trackbar installed upside down? It has the bends in it to avoid the exhaust and the pumpkin. But it looks like they are flipped, where they will hit both of those more easily. If you flip it, it would hit those less easily. I dunno, maybe it just looks that way from the pic.

Ya, that thing is on upside down.

Probably just looks that way in the pic. Metal Cloak instructions show the adjustable end at the frame as installed in the pic.

 

[Alanscott1]

Jeep got a nose job.