wv18jl
Well-Known Member
Are these available?
Will order now if so.
Are these available?
Those look great. Iām trying to decide between those and the D1 model. Did you have any trouble with the body bolts?Go Rhino DSS steps installed!
Not yet. Will be available around February. Iād contact roam and see if you can get on a pre order list. If they are anything like the rest of them products, they will be going fastAre these available?
Will order now if so.
Mounting the brackets to the body was no big deal but the bolts connecting the nut plate inside the step to the mount was a real PITA. I got really good advise from @vhfan5150 to keep everything loose and half lined up. The issue is the hex bolts they provided only allow an open ended wrench to tighten which you can only turn a 1/4 turn at a time x12 bolts. If you have patience (lots and lots of patience) the steps are great, just enough step for a solid footing without sticking out to far.Those look great. Iām trying to decide between those and the D1 model. Did you have any trouble with the body bolts?
Cool! Thanks for the advice and notes.Mounting the brackets to the body was no big deal but the bolts connecting the nut plate inside the step to the mount was a real PITA. I got really good advise from @vhfan5150 to keep everything loose and half lined up. The issue is the hex bolts they provided only allow an open ended wrench to tighten which you can only turn a 1/4 turn at a time x12 bolts. If you have patience (lots and lots of patience) the steps are great, just enough step for a solid footing without sticking out to far.
Looks good man!Installed 1.75 spidertrax wheel spacers, Rubicon shocks and springs, and a TeraFlex 1.5 performance spacer kit. Waiting on stock tires to wear out.......
Thx!! Those spacers worked out great!!Looks good man!
Great Pics!Added the Mopar Tailgate Table
Installation time = .25 of a beer, very easy.
Added molle bags:
Added LED light strip to the ādark pitā: