What did you do TO your Jeep JL today?

[EarlyJK]

Type in Wrangler Decal Red. It was the 2nd or 3rd posting.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/192599519266

I just bought the Ocean Blue one... for $14 can’t really go wrong. Need something to break up the grey

 

[RubiRob]

Got my Quadratec HardRock wheels and 37" KO2's mounted and installed. Very happy that I can reused my OEM lugs, OEM locking lugs and even the little plastic that surrounds the camera again. I got these tires for a few good reasons:

1.) I like how they look
2.) They're LIGHT. OEMish weight of 26-28bs. (my Black Rhinos were 41lbs)
3.) They have the perfect amount of size and offset (17x8.5 +12mm) and stick out about ONE inch outside of the fenders.
4.) They don't rub at all
5.) They're cheap. $800 shipped for all 5

BTW: Anyone with 37's ever get told that the tires couldn't be "balanced to zero?" They guy said that a few of the wheels needed almost 300g of weights, which he couldn't do. He said I might get some vibration but that was to be expected with 37's. I dunno how true that is, but I don't feel any vibrations. I have read that the KO2s could be difficult to balance tho.

 

[aerosynch]

Like your side rails/steps. Brand?

Thanks, they are TNT Customs.

 

[RubiRob]

U know I did mention that Road Force Balancer and he told me it wouldn't make a difference. Ill keep that in mind when it gets to rotating them!

 

[cnyjl]

Got my Quadratec HardRock wheels and 37" KO2's mounted and installed. Very happy that I can reused my OEM lugs, OEM locking lugs and even the little plastic that surrounds the camera again. I got these tires for a few good reasons:

1.) I like how they look
2.) They're LIGHT. OEMish weight of 26-28bs. (my Black Rhinos were 41lbs)
3.) They have the perfect amount of size and offset (17x8.5 +12mm) and stick out about ONE inch outside of the fenders.
4.) They don't rub at all
5.) They're cheap. $800 shipped for all 5

BTW: Anyone with 37's ever get told that the tires couldn't be "balanced to zero?" They guy said that a few of the wheels needed almost 300g of weights, which he couldn't do. He said I might get some vibration but that was to be expected with 37's. I dunno how true that is, but I don't feel any vibrations. I have read that the KO2s could be difficult to balance tho.



Not 37's but was told the same when I had my 35's mounted on Fuel Anza wheels. I did have a weird vibration at 70 and above. When I rotated the tires it was worse. Took mine to a facility with the Hunter Road Force balancer and it's better now with the 35's than it was with the factory 33's.

 

[cnyjl]

U know I did mention that Road Force Balancer and he told me it wouldn't make a difference. Ill keep that in mind when it gets to rotating them!

I've read that a lot online too, that it wouldn't make a difference. It cost me $20 a tire, but was well worth it. The ride is really smooth now. It was bad enough before that I loved driving it on secondary roads but hated getting on interstates. Now I'm passing everyone. If anyone has a vibration after going to bigger tires I would recommend giving it a shot. From what I've read it even recommends which position to install each tire for the best ride, as well as real accuracy as far as placing weights. I had mine originally mounted at costco and they told me they were having problems balancing one of them and it ended up with so much weight it was the spare. I told the Hunter place to try to rotate in the spare if possible, and after balancing it, it was back at the spare spot.

 

[RubiRob]

I've read that a lot online too, that it wouldn't make a difference. It cost me $20 a tire, but was well worth it. The ride is really smooth now. It was bad enough before that I loved driving it on secondary roads but hated getting on interstates. Now I'm passing everyone. If anyone has a vibration after going to bigger tires I would recommend giving it a shot. From what I've read it even recommends which position to install each tire for the best ride, as well as real accuracy as far as placing weights. I had mine originally mounted at costco and they told me they were having problems balancing one of them and it ended up with so much weight it was the spare. I told the Hunter place to try to rotate in the spare if possible, and after balancing it, it was back at the spare spot.

Cool, thanks. I figured I'd go to the next discount tire and ask them to check it out, and do the Force balance at that point. 37's plus mount was more than enough money with them already! Either way, right now it's still pretty smooth.

 

[Truax]

I put the rough country 2.5 lift on last weekend with a buddy and tonight I got some 37s.

 

[My#8andlast]

Yep. I have the Reinforcement bracket also and saw that the normal antenna stud mount wasn’t long enough. Where did u get the longer bolt or stud from. ? Thanks

Lowes.

 

[Euro JEEP]

JFTops.com

Does it have hinges to open or is it fixed and needs unscrewing to open that panel?

 

[deerjeep79]

Does it have hinges to open or is it fixed and needs unscrewing to open that panel?

It’s fixed. At some point I plan to modify it a bit and add a hinged door for the middle of it.

 

[jeremyjeep]

Type in Wrangler Decal Red. It was the 2nd or 3rd posting.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/192599519266

Thanks. Out of curiosity, I tried the same search Wrangler Decal Red and it was on the top of page 2. I guess eBay personalizes search results, similar to Google's search personalization 'feature'.

 

[lookitsadam]

Got my Quadratec HardRock wheels and 37" KO2's mounted and installed. Very happy that I can reused my OEM lugs, OEM locking lugs and even the little plastic that surrounds the camera again. I got these tires for a few good reasons:

1.) I like how they look
2.) They're LIGHT. OEMish weight of 26-28bs. (my Black Rhinos were 41lbs)
3.) They have the perfect amount of size and offset (17x8.5 +12mm) and stick out about ONE inch outside of the fenders.
4.) They don't rub at all
5.) They're cheap. $800 shipped for all 5

BTW: Anyone with 37's ever get told that the tires couldn't be "balanced to zero?" They guy said that a few of the wheels needed almost 300g of weights, which he couldn't do. He said I might get some vibration but that was to be expected with 37's. I dunno how true that is, but I don't feel any vibrations. I have read that the KO2s could be difficult to balance tho.

This looks good! I'm planning on buying the all black ones. The stock Sport S wheels are doing just fine for now with my 35s but I do get some slight rub when turning full lock at low speeds

 

[Mr. Beef Chief]

Got my Quadratec HardRock wheels and 37" KO2's mounted and installed. Very happy that I can reused my OEM lugs, OEM locking lugs and even the little plastic that surrounds the camera again. I got these tires for a few good reasons:

1.) I like how they look
2.) They're LIGHT. OEMish weight of 26-28bs. (my Black Rhinos were 41lbs)
3.) They have the perfect amount of size and offset (17x8.5 +12mm) and stick out about ONE inch outside of the fenders.
4.) They don't rub at all
5.) They're cheap. $800 shipped for all 5

BTW: Anyone with 37's ever get told that the tires couldn't be "balanced to zero?" They guy said that a few of the wheels needed almost 300g of weights, which he couldn't do. He said I might get some vibration but that was to be expected with 37's. I dunno how true that is, but I don't feel any vibrations. I have read that the KO2s could be difficult to balance tho.

Looks great. What lift are you running?

 

[MALL R8D]

My Jeep is named Marshmallow so I made these today with Crayola Model Magic clay and some makeup to decorate them.