What did you do TO your Jeep JL today?

[mikej]

I’m putting this on now. Was it tuff to line up the driver side or did it sag relentlessly? I’m having some sag problems that I can’t seem to lift enough. Think a shim might help. Also, any problems with putting in the new door detent? I tried mine per the instructions and it bent in half! They’re sending me another. Rough day

I played with the adjustments a lot to get it to all line up. The shim on the bottom body hinge mount helped with the process. You can also move the latch down to compensate if need be.

No issues with the new detent. The old one was a bit of a pain to remove, though. Sorry yours broke!

Ultimately I’m happy now that it’s on and aligned. I never want to deal with it again, though.

 

[USMCJL]

Those look great!!! Can you link which ones you got?

Here you Go.
https://rokblokz.com/collections/tr...-jl-jlu-2018-mud-flaps?variant=15068541517867

 

[KHR Racing]

Playing with nuts and bolts. 2022 Rubicon 2 door……

 

[Wkywhitealtitude]

Playing with nuts and bolts. 2022 Rubicon 2 door……

I like the strap style linkage and Bluetooth coil springs! You going with a whole new suspension or axles?

 

[KHR Racing]

I like the strap style linkage and Bluetooth coil springs! You going with a whole new suspension or axles?

……… TeraFlex long arm suspension, Tera flex Falcon shocks and a bunch other crap I picked up on Black Friday for right now at least. Jeeps a week old now…..lol.

 

[jlewissystem]

Guys. What are my cheap options to move the license plate out of the way of camera outside the large offset rim?

I use this - https://www.artecindustries.com/jllpmount
Added an LED as well (in our thread)

 

[SadRobot]

I swapped out my RC lift/shocks for EVO lift and Fox 2.0s. Both were 2.5" lifts but the EVO seems to have added at least another inch beyond that. The first drive into my garage was a nail biter for sure. Fits with 1/4 inch to spare.

 

[JSFoster75]

I added color-matching (ok, they are close) knobs to the interior and a arm rest protector/cushion to the center console.

https://www.amazon.com/dp/B09DKFD1VP?psc=1&ref=ppx_yo2_dt_b_product_details
https://www.amazon.com/dp/B07M7XSPZ4?psc=1&ref=ppx_yo2_dt_b_product_details

 

[SlickRickMotoADV]

Finally finished the install of the Goose Gear 60% seat delete plate system today.

 

[Jeepmarkjl]

Finally finished the install of the Goose Gear 60% seat delete plate system today.

Nice job. I ordered exact same 2 weeks ago. How long did yours take to arrive? Install seems pretty straight forward, right? If you had to put rear seat back in for some reason, can you take the 60% goose gear section out in one chunk or would have to be disassembled again?

 

[Encore85]

I had installed the AFE Power DPF back Hi Tuck exhaust on my 2021 JLURD

 

[INCRHULK]

Had my Teraflex SP2 and Falcon mono shocks installed. Went from 35” at the front fender to 40”. I will see what it settles down to after a couple of weeks.

 

[Hercules]

I had installed the AFE Power DPF back Hi Tuck exhaust on my 2021 JLURD

I like it. I went with the MBRP xp axle back. Didn’t see many options for the diesel out there

 

[SDJeeper86ed]

Rock Slide tailgate table

 

[hiilong]

Adding Hothead Headliners Sound Assassins Floor Package.