How was the wiring install for the lights?Added my third brake and reverse lights. So far so good!
@DaffydnbugsHow was the wiring install for the lights?
I didn’t use that brand but they are all the same. Perfect for those that use hitch bike racks.
I ran all wires through the hardtop. They come wired together so I cut them so that the wires are concealed. Wired everything to a 4 pin quick disconnect shown in the picture. Ran two wires (Ground and reverse) to the taillight on the driver side and the brake light off of the passenger side wire going into the tailgate. Not bad if you are comfortable doing basic wiring and have taken the rear panels apart before.How was the wiring install for the lights?
@SilverblkrillaI ran all wires through the hardtop. They come wired together so I cut them so that the wires are concealed. Wired everything to a 4 pin quick disconnect shown in the picture. Ran two wires (Ground and reverse) to the taillight on the driver side and the brake light off of the passenger side wire going into the tailgate. Not bad if you are comfortable doing basic wiring and have taken the rear panels apart before.
Was the decal easy to install? I have that very design saved in my To Buy list. TIA.
That shade of green adds a perfect retro flair to the dashboard. Well chosen.Welcomed my 392...
She's going into her new customized designed paint job today - Grassmere green and old Landrover paint I tweaked a little.
Mm. Good paint work costs good money. $1K or so seems appropriate for the quoted work. Let us know how it goes.
After waiting and waiting, buying a JL and waiting some more, I finally got fed up and bought the JCR half door offering. Gonna see a local shop about paint today, crossing my fingers they don't try to ream me like MAAACO did - they quoted me just over a g for color matching on both doors and the hinges.