What did you do TO your Jeep JL today?

[Mikester86]

After a few months sitting in the garage waiting for warmer weather... finally installed my Synergy upper and lower, front and rear, adjustable control arm kit. Also installed the Synergy adjustable rear track bar and sway bar links... next step - alignment and geometry. Also did my second oil change and sent off the sample to Blackstone Labs.

What size lift! Those arms look to be at a pretty steep angle. Geo correction brackets would really help with the ride quality I would think. But if ground clearance is an absolute concern, stay with the arms.

 

[CalPolyDM]

What size lift! Those arms look to be at a pretty steep angle. Geo correction brackets would really help with the ride quality I would think. But if ground clearance is an absolute concern, stay with the arms.

Mopar 2” lift... more like 3” though. Goes in on Wed for an 8 arm alignment so everything may change.

 

[Roky]

Mopar 2” lift... more like 3” though. Goes in on Wed for an 8 arm alignment so everything may change.

If you didn’t add adj track bars and adj lcas, then there’s no need for alignment with Mopar lift.

 

[Heimkehr]

I like that wheel & tire combination on Moonbeam.

 

[CalPolyDM]

If you didn’t add adj track bars and adj lcas, then there’s no need for alignment with Mopar lift.

I replaced all the control arms (8) with Synergy Adj arms.

 

[Roky]

I replaced all the control arms (8) with Synergy Adj arms.

How about track bar ?

 

[runklda]

Installed a bestop trektop and grabbed a buddies rubicon rear bumper so it looked better with the fender flares

 

[cosine]

added a quadratec flash light holder w/red maglite.

how is the mount mounted. also what size is the mag lite.

 

[CalPolyDM]

How about track bar ?

I did the front track bar awhile ago, also Synergy Adj. When I did the control arms I did the Synergy Adj rear bar. My rear axle was still off so wanted it fixed.

 

[Crusifix]

It didn't go exactly as I had it planned out, but you take what you are given. I still have some clean up to do, but I'm exhausted.

 

[NewJLU2019]

Mopar 2” lift... more like 3” though. Goes in on Wed for an 8 arm alignment so everything may change.

Just picked my Jeep up and the Mopar 2.0" lift has raised 4" It will settle some but not much they say. Well from what the Factory Rubicon Wheels and Tires were set at with Factory Rubicon normal lift it has.

I had my Dealership set up when I ordered Jeep to do all my Wheels/Tires and Mopar Lift so it's all warranty.

 

[Steel8083]

how is the mount mounted. also what size is the mag lite.

Snaps onto seat rail screws go in from back to secure it. Thats a 3 cel. Wouldnt want to go longer

 

[cosine]

Snaps onto seat rail screws go in from back to secure it. Thats a 3 cel. Wouldnt want to go longer

c or d size

 

[Steel8083]

c or d size

D cell

 

[huff747]

Picked up some ACE sliders, cleaned the up a bit and gave them a little once over with some bedliner and got them mounted.